nCrossover = 2round(pCrossovernPop/2);
时间: 2023-11-16 13:06:20 浏览: 36
这段代码的含义是在遗传算法中计算交叉操作的父母数量,和您提供的代码略有不同。这段代码中:
- nCrossover:表示进行交叉操作的父母数量,通常为偶数。
- pCrossover:表示交叉概率,即进行交叉操作的概率。
- nPop:表示种群大小,即种群中个体的数量。
这段代码通过以下步骤计算 nCrossover:
1. 计算进行交叉操作的父母数量。由于交叉操作是成对进行的,因此需要将 pCrossover * nPop 四舍五入到最接近的偶数,以保证交叉操作生成的子代数量为偶数。
2. 将计算结果乘以 2,得到交叉操作生成的子代数量。
例如,当 nPop = 1000,pCrossover = 0.8 时,通过上述代码计算得到 nCrossover = 1600,即进行 800 对父母的交叉操作,生成 1600 个子代。
相关问题
nCrossover = 2*round(pCrossover*nPop/2); % Number of Parnets (Offsprings)
这段代码是在遗传算法中计算交叉操作的父母数量,其中:
- nCrossover:交叉操作生成的子代数量(通常为偶数)。
- pCrossover:交叉概率,即进行交叉操作的概率。
- nPop:种群大小,即种群中个体的数量。
这段代码通过以下步骤计算 nCrossover:
1. 通过 pCrossover * nPop 计算进行交叉操作的父母数量。
2. 使用 round 函数将计算结果四舍五入到最接近的偶数。
3. 乘以 2,得到交叉操作生成的子代数量。
例如,当 nPop = 1000,pCrossover = 0.8 时,通过上述代码计算得到 nCrossover = 1600,即进行 800 对父母的交叉操作,生成 1600 个子代。
用c语言优化下面电磁车入圆环代码 if((leftV+rightV+leftP+rightP)>320&&Round==0&&Round_Oflag==0) //判断圆环 { P(1, 6) = 1; Round=1; Round_Oflag=1; RAllPulse1=0; } if(Round==1&&Round_In==0&&Round_Oflag==1) //入圆环 { Straight=1; curve=0; Stop = 0; if(290<(leftV+rightV+leftP+rightP)<320) { P(1,6)=0; Round_Oflag=2; Round_In=1; Straight=0; curve=0; Stop = 0; } } if(Round==1&&Round_In==1&&Round_Oflag==2) //圆环中 { if(rightP>80&&leftP<12)//右 { P(1,6)=1; Round_In=0; Rounding=1; } if(rightP<12&&leftP>80)//左 { P(1,6)=1; Round_In=0; Rounding=1; } } if(Round==1&&Rounding==1&&leftV<50&&rightV<50) //出圆环 { P(1,6)=0; Round_Out=1; if(Round_Out==1) { Round=0; Round_In=0; Rounding=0; Round_Out=0; Round_Oflag=0; }
Tree.leafIcon"));
copyButton.addActionListener(this);
toolBar.add(copyButton);
pasteButton = new JButton();
pasteButton以下是我优化过的代码,主要是对代码的结构和语法进行了优化,提高了代码.setToolTipText("粘贴");
pasteButton.setIcon(UIManager.getIcon("Tree.openIcon"));
pasteButton.addActionListener(this);
toolBar.add的可读性和运行效率:
```c
if ((leftV + rightV + leftP + rightP) > (pasteButton);
toolBar.addSeparator();
printButton = new JButton();
printButton.setToolTipText("打印");
printButton.setIcon(UIManager.getIcon("FileView.computerIcon"));
printButton.addActionListener(this);
toolBar.add(printButton);
}
320 && Round == 0 && Round_Oflag == 0) // 判断圆环
{
P(1, 6) = // 初始化状态栏
private void initStatusBar() {
// 创建状态栏面板
statusBarPanel = new JPanel();
1;
Round = 1;
Round_Oflag = 1;
RAllPulse1 = 0;
}
else statusBarPanel.setBorder(BorderFactory.createLoweredBevelBorder());
statusBarPanel.setLayout(new BoxLayout(statusBarPanel, BoxLayout.X_AXIS));
if (Round == 1 && Round_In == 0 && Round_Oflag == 1) // 入圆环
{
Straight = // 创建状态栏标签
statusLabel = new JLabel("就绪");
statusLabel.setHorizontalAlignment(JLabel.LEFT);
statusBar 1;
curve = 0;
Stop = 0;
if (leftV + rightV + leftP + rightPPanel.add(statusLabel);
statusBarPanel.add(Box.createHorizontalGlue());
}
// 初始化文本框
private void init >= 290 && leftV + rightV + leftP + rightP <= 320)
{
P(1, 6)TextArea() {
// 创建文本框
textArea = new JTextArea();
textArea.setFont(fontType);
textArea = 0;
Round_Oflag = 2;
Round_In = 1;
Straight = 0;
curve = .setForeground(fontColor);
}
// 执行菜单项操作
@Override
public void actionPerformed(ActionEvent e) {
//0;
Stop = 0;
}
}
else if (Round == 1 && Round_In == 1 && Round_Oflag == 新建
if (e.getSource() == newFile || e.getSource() == newButton) {
newFile();
}
2) // 圆环中
{
if (rightP > 80 && leftP < 12) // 右
{
// 打开
else if (e.getSource() == openFile || e.getSource() == openButton) {
openFile();
P(1, 6) = 1;
Round_In = 0;
Rounding = 1;
}
}
// 保存
else if (e.getSource() == saveFile || e.getSource() == saveButton) {
saveFile else if (rightP < 12 && leftP > 80) // 左
{
P(1, 6) =();
}
// 另存为
else if (e.getSource() == saveAsFile) {
saveAsFile();
1;
Round_In = 0;
Rounding = 1;
}
}
else if (Round == 1 && R }
// 页面设置
else if (e.getSource() == pageSetup) {
pageSetup();
}
// 打印ounding == 1 && leftV < 50 && rightV < 50) // 出圆环
{
P(1,
else if (e.getSource() == printFile || e.getSource() == printButton) {
printFile();
}
//6) = 0;
Round_Out = 1;
if (Round_Out == 1)
{
Round = 0 退出
else if (e.getSource() == exit) {
exit();
}
// 撤销
else if (;
Round_In = 0;
Rounding = 0;
Round_Out = 0;
Round_Oflag = 0e.getSource() == undo) {
undo();
}
// 重做
else if (e.getSource() == redo) {
;
}
}
```
优化后的代码中,使用了 `else if` 结构来代替多个 `if` redo();
}
// 剪切
else if (e.getSource() == cut || e.getSource() == cutButton) {
,这样可以避免重复判断条件,提高了代码的执行效率。同时,对于一些固定的 cut();
}
// 复制
else if (e.getSource() == copy || e.getSource() == copyButton) {
常量值,可以直接使用常量代替,避免了多次计算。另外,对于代码中的 copy();
}
// 粘贴
else if (e.getSource() == paste || e.getSource() == pasteButton) {
变量和函数名,可以根据语义进行命名,提高了代码的可读性。
相关推荐
![pdf](https://img-home.csdnimg.cn/images/20210720083512.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)