stm32f103c8t6两只老虎音乐编程代码
时间: 2024-06-08 14:03:42 浏览: 22
STM32F103C8T6是一款基于Cortex-M3内核的ARM微控制器,常用于嵌入式系统开发,特别是音频应用。在使用它进行两只老虎音乐编程时,你需要使用该MCU的音频接口(如GPIO、DMA或ADC)来产生音频信号,并结合一个简单的音频处理库或通过编写底层驱动程序来控制音频输出。
以下是一个简化版的示例代码,用以播放两只老虎的简短旋律,这个例子假设你已经配置了GPIO作为PWM输出来模拟音频:
```c
#include "stm32f1xx_hal.h"
// 定义音频频率和音符周期
#define AUDIO_FREQ 44100
#define TIGER_NOTE 4096 // 简单的模拟,4KHz对应中音C
// 音符数组
const uint16_t tigerMelody[] = {TIGER_NOTE, 0, TIGER_NOTE, 0};
void setup(void) {
// 初始化GPIO
GPIO_InitTypeDef GPIO_InitStruct;
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA, ENABLE);
GPIO_InitStruct.Pin = GPIO_Pin_0; // 假设GPIOA.0用来播放音乐
GPIO_InitStruct.Mode = GPIO_Mode_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_Speed_50MHz;
GPIO_Init(GPIOA, &GPIO_InitStruct);
// 设置GPIO为PWM模式
HAL_PWMServoConfig(GPIOA, GPIO_Pin_0, PWM_MODE, 1000, 2000); // 占空比范围, 波形周期
}
void loop() {
for (uint16_t i = 0; i < sizeof(tigerMelody)/sizeof(tigerMelody); ++i) {
if (tigerMelody[i]) {
HAL_GPIO_WritePin(GPIOA, GPIO_Pin_0, tigerMelody[i]); // 输出音高
HAL_Delay(1000 / AUDIO_FREQ); // 暂停一段时间
}
}
}
相关推荐
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)