#include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <stdio.h> #include <unistd.h> #include <string.h> #include <sys/mman.h> //德国国旗 int main(void) { int fd_lcd; int lcd_buf[800*480]; //显存。int -- 4B int j,i; fd_lcd = open("/dev/fb0", O_WRONLY); if(fd_lcd == -1) { perror("open lcd"); return -1; } printf("fd_lcd = %d\n", fd_lcd); for(i=0;i<800*160;i++) lcd_buf[i]=0x00000000; for(i=800*160;i<800*320;i++) lcd_buf[i]=0x00FF0000; for(i=800*320;i<800*480;i++) lcd_buf[i]=0x00FFD700; write(fd_lcd,lcd_buf,sizeof(lcd_buf)); close(fd_lcd); return 0; }仿照以上代码绘制瑞士国旗
时间: 2024-04-18 18:34:10 浏览: 18
以下是一个使用C语言在Linux系统下实现瑞士国旗的代码示例:
```c
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <stdio.h>
#include <unistd.h>
#include <string.h>
#include <sys/mman.h>
int main(void)
{
int fd_lcd;
int lcd_buf[800*480]; // 显存。int -- 4B
int j, i;
fd_lcd = open("/dev/fb0", O_WRONLY);
if (fd_lcd == -1)
{
perror("open lcd");
return -1;
}
printf("fd_lcd = %d\n", fd_lcd);
// 绘制红色背景
for (i = 0; i < 800*480; i++)
{
lcd_buf[i] = 0x00FF0000;
}
// 绘制白色十字
int center_x = 400;
int center_y = 240;
int width = 100;
int height = 20;
// 绘制横向条纹
for (i = center_x - width/2; i < center_x + width/2; i++)
{
for (j = 0; j < 480; j++)
{
lcd_buf[j*800 + i] = 0x00FFFFFF;
}
}
// 绘制纵向条纹
for (i = center_y - height/2; i < center_y + height/2; i++)
{
for (j = 0; j < 800; j++)
{
lcd_buf[i*800 + j] = 0x00FFFFFF;
}
}
write(fd_lcd, lcd_buf, sizeof(lcd_buf));
close(fd_lcd);
return 0;
}
```
这段代码与之前的德国国旗代码类似,使用了 `/dev/fb0` 设备文件来进行屏幕绘制。首先将整个屏幕填充为红色背景,然后在屏幕中央绘制一个白色的十字。通过调整 `center_x`、`center_y`、`width` 和 `height` 变量的值,可以调整十字的位置和大小。
请注意,在运行该代码之前,确保你有适当的权限来访问 `/dev/fb0` 设备文件。同时,屏幕分辨率和显示模式可能会影响国旗的显示效果。