ds2431芯片rom怎么读出来
时间: 2023-09-28 18:02:09 浏览: 85
DS2431芯片是一种具有1K位EEPROM存储器的ROM芯片。要读取DS2431芯片中的数据,可以按照以下步骤进行操作:
1. 准备工作:确保你有一台与DS2431芯片兼容的合适的设备,例如Arduino开发板或者其他支持I2C协议的硬件设备。
2. 连接硬件:将DS2431芯片与设备进行正确的电路连接,通常需要连接芯片的电源和地线,以及I2C线路(SDA和SCL)连接到设备的相应引脚。
3. 初始化I2C总线:使用设备的相关库函数或指令初始化I2C总线,设置合适的速率和地址。
4. 发送读取命令:向芯片发送一条读取指令,指定要读取的存储位置和读取的字节数。
5. 读取数据:接收来自芯片的数据,并将其存储在设备的内存中。可以使用相关库函数或指令来实现读取操作。
6. 处理数据:根据需要对读取到的数据进行处理,例如进行数据解码、转换或存储等。
7. 关闭I2C总线:读取完数据后,关闭I2C总线以释放相关资源。
8. 处理错误:在整个读取过程中,需要监测和处理可能出现的错误,例如通信错误或读取错误。
需要注意的是,具体的操作步骤可能因设备的不同而有所差别。因此,在实际操作中,可以参考DS2431芯片的相关文档和设备的说明来进行具体操作。
相关问题
ds2401的rom id 地址更改
DS2401是一种基于1-Wire协议的芯片,ROM ID是唯一识别芯片的地址,一般情况下不建议更改ROM ID地址。如果非要更改ROM ID地址,可以按照以下步骤进行:
1. 确认原ROM ID地址,记录下来备份;
2. 将DS2401芯片连接到1-Wire总线上;
3. 发送ROM ID的写命令(0Fh);
4. 发送新的ROM ID地址;
5. 开始写入新的ROM ID地址;
6. 写入完成后,再次读取ROM ID地址进行确认。
需要注意的是,更改ROM ID地址可能会对系统带来意想不到的影响,因此建议在非必要情况下不要更改ROM ID地址。
使用STM32F103芯片编写一个访问DS18B20程序
以下为使用STM32F103芯片编写访问DS18B20程序的示例代码:
```c
#include "stm32f10x.h"
#define DS18B20_PIN GPIO_Pin_15
#define DS18B20_PORT GPIOB
void delay_us(uint32_t us)
{
for(uint32_t i=0; i<us*8; i++);
}
void ds18b20_init(void)
{
GPIO_InitTypeDef GPIO_InitStruct;
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB, ENABLE);
GPIO_InitStruct.GPIO_Pin = DS18B20_PIN;
GPIO_InitStruct.GPIO_Mode = GPIO_Mode_Out_OD;
GPIO_InitStruct.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_Init(DS18B20_PORT, &GPIO_InitStruct);
GPIO_SetBits(DS18B20_PORT, DS18B20_PIN);
}
void ds18b20_write_byte(uint8_t byte)
{
for(uint8_t i=0; i<8; i++) {
GPIO_ResetBits(DS18B20_PORT, DS18B20_PIN);
delay_us(2);
if(byte & (1 << i)) {
GPIO_SetBits(DS18B20_PORT, DS18B20_PIN);
}
delay_us(60);
GPIO_SetBits(DS18B20_PORT, DS18B20_PIN);
delay_us(2);
}
}
uint8_t ds18b20_read_byte(void)
{
uint8_t byte = 0;
for(uint8_t i=0; i<8; i++) {
GPIO_ResetBits(DS18B20_PORT, DS18B20_PIN);
delay_us(2);
GPIO_SetBits(DS18B20_PORT, DS18B20_PIN);
delay_us(2);
if(GPIO_ReadInputDataBit(DS18B20_PORT, DS18B20_PIN)) {
byte |= (1 << i);
}
delay_us(60);
}
return byte;
}
void ds18b20_start_conversion(void)
{
ds18b20_init();
ds18b20_write_byte(0xCC); // Skip ROM
ds18b20_write_byte(0x44); // Start conversion
}
float ds18b20_read_temperature(void)
{
ds18b20_init();
ds18b20_write_byte(0xCC); // Skip ROM
ds18b20_write_byte(0xBE); // Read scratchpad
uint8_t temp_l = ds18b20_read_byte();
uint8_t temp_h = ds18b20_read_byte();
float temp = ((temp_h << 8) | temp_l) * 0.0625;
return temp;
}
int main(void)
{
float temperature;
ds18b20_start_conversion();
while(1) {
temperature = ds18b20_read_temperature();
// Do something with temperature
}
}
```
上述代码实现了DS18B20的初始化、写入字节、读取字节、启动转换和读取温度等功能。其中,ds18b20_start_conversion()函数用于启动转换,ds18b20_read_temperature()函数用于读取温度。在主函数中,使用while(1)循环不断读取温度并进行处理。注意,由于DS18B20的读取需要一定的时间,因此需要适当延迟一段时间后再进行读取。
相关推荐
![pdf](https://img-home.csdnimg.cn/images/20210720083512.png)
![rar](https://img-home.csdnimg.cn/images/20210720083606.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)