如何在mdk中制作一个stm32简单的串口发送通讯协议,能不能举个例子或者写一段代码
时间: 2024-04-29 09:27:02 浏览: 10
好的,我明白了。关于你的问题,以下是一个简单的示例代码,它演示了如何在STM32的MDK中使用UART1发送字符串。
```c
#include "stm32f10x.h"
void USART1_Init(void) {
GPIO_InitTypeDef GPIO_InitStructure;
USART_InitTypeDef USART_InitStructure;
// 使能USART1时钟
RCC_APB2PeriphClockCmd(RCC_APB2Periph_USART1 | RCC_APB2Periph_GPIOA, ENABLE);
// 配置USART1 Tx (PA.09) 作为推挽输出
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_Init(GPIOA, &GPIO_InitStructure);
// 配置USART1的工作参数
USART_InitStructure.USART_BaudRate = 115200;
USART_InitStructure.USART_WordLength = USART_WordLength_8b;
USART_InitStructure.USART_StopBits = USART_StopBits_1;
USART_InitStructure.USART_Parity = USART_Parity_No;
USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
USART_InitStructure.USART_Mode = USART_Mode_Tx;
USART_Init(USART1, &USART_InitStructure);
// 使能USART1
USART_Cmd(USART1, ENABLE);
}
void USART1_SendString(const char* s) {
while (*s) {
while (!(USART1->SR & USART_SR_TXE)) {
}
USART1->DR = *s++;
}
}
int main() {
USART1_Init();
USART1_SendString("Hello World!");
while (1) {
}
}
```
这段代码使用USART1的PA9引脚作为串行通信端口,并使用115200的波特率进行通信。在主函数中,我们调用了`USART1_Init()`函数以初始化USART1,然后调用`USART1_SendString()`函数以向串口发送字符串"Hello World!"。最后,我们进入了一个无限循环,以保持程序运行。
希望这个示例能够回答你的问题。如果你有任何其他疑问,请不要犹豫,随时向我提出。