有没有stm32f407接mq135的代码
时间: 2023-09-19 14:05:05 浏览: 59
以下是一个基本的STM32F407与MQ135传感器的代码示例,仅供参考:
```
#include "stm32f4xx.h"
#include "stdio.h"
#define MQ135_PIN GPIO_Pin_0
#define MQ135_PORT GPIOA
float V_Ro = 0.0;
float V_Rs = 0.0;
void GPIO_Configuration(void);
void ADC_Configuration(void);
void Delay_ms(uint32_t ms);
int main(void)
{
GPIO_Configuration();
ADC_Configuration();
ADC_SoftwareStartConv(ADC1);
while (1)
{
if (ADC_GetFlagStatus(ADC1, ADC_FLAG_EOC))
{
V_Rs = ((float)ADC_GetConversionValue(ADC1) / 4095.0) * 3.3; // 规格曲线参考电压为 3.3V
printf("V_Rs = %f\n", V_Rs);
printf("PPM = %f\n", (V_Rs / V_Ro) * 1000.0);
ADC_ClearFlag(ADC1, ADC_FLAG_EOC);
}
Delay_ms(1000);
}
}
void GPIO_Configuration(void)
{
GPIO_InitTypeDef GPIO_InitStructure;
RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOA, ENABLE);
GPIO_InitStructure.GPIO_Pin = MQ135_PIN;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AN;
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
GPIO_Init(MQ135_PORT, &GPIO_InitStructure);
}
void ADC_Configuration(void)
{
ADC_CommonInitTypeDef ADC_CommonInitStructure;
ADC_InitTypeDef ADC_InitStructure;
RCC_APB2PeriphClockCmd(RCC_APB2Periph_ADC1, ENABLE);
ADC_CommonInitStructure.ADC_Mode = ADC_Mode_Independent;
ADC_CommonInitStructure.ADC_Prescaler = ADC_Prescaler_Div2;
ADC_CommonInitStructure.ADC_DMAAccessMode = ADC_DMAAccessMode_Disabled;
ADC_CommonInitStructure.ADC_TwoSamplingDelay = ADC_TwoSamplingDelay_5Cycles;
ADC_CommonInit(&ADC_CommonInitStructure);
ADC_InitStructure.ADC_Resolution = ADC_Resolution_12b;
ADC_InitStructure.ADC_ScanConvMode = DISABLE;
ADC_InitStructure.ADC_ContinuousConvMode = DISABLE;
ADC_InitStructure.ADC_ExternalTrigConvEdge = ADC_ExternalTrigConvEdge_None;
ADC_InitStructure.ADC_ExternalTrigConv = ADC_ExternalTrigConv_T1_CC1;
ADC_InitStructure.ADC_DataAlign = ADC_DataAlign_Right;
ADC_InitStructure.ADC_NbrOfConversion = 1;
ADC_Init(ADC1, &ADC_InitStructure);
ADC_Cmd(ADC1, ENABLE);
ADC_RegularChannelConfig(ADC1, ADC_Channel_0, 1, ADC_SampleTime_84Cycles);
ADC_ResetCalibration(ADC1);
while (ADC_GetResetCalibrationStatus(ADC1));
ADC_StartCalibration(ADC1);
while (ADC_GetCalibrationStatus(ADC1));
// 读取 MQ135 传感器的 Ro(零点电压)
ADC_SoftwareStartConv(ADC1);
while (1)
{
if (ADC_GetFlagStatus(ADC1, ADC_FLAG_EOC))
{
V_Ro = ((float)ADC_GetConversionValue(ADC1) / 4095.0) * 3.3; // 规格曲线参考电压为 3.3V
printf("V_Ro = %f\n", V_Ro);
ADC_ClearFlag(ADC1, ADC_FLAG_EOC);
break;
}
Delay_ms(1000);
}
}
void Delay_ms(uint32_t ms)
{
uint32_t i;
for (i = 0; i < (ms * 3360); i++);
}
```
注意,这只是一个基础的代码示例,可能需要根据你的具体情况进行修改。例如,你可能需要更改ADC采样时间、规格曲线、传感器的预热时间等等。
相关推荐
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://img-home.csdnimg.cn/images/20210720083646.png)