ip=`echo ${ip_info} | awk -F '/' '{print $1}'`
时间: 2024-01-04 09:02:18 浏览: 23
这段命令用于从 IP 地址中提取出不带子网掩码的部分。具体来说,它会执行以下操作:
1. 使用 `${ip_info}` 变量来获取一个 IP 地址,这个变量通常是从前面的命令中获取的。
2. 使用 `awk -F '/' '{print $1}'` 命令来按照 "/" 符号进行分割,提取第一个字段,也就是 IP 地址的主机部分。
最终,这个命令会将不带子网掩码的 IP 地址作为一个变量输出,可以将这个变量用于后续的操作,例如在脚本中对每个 IP 地址进行处理。
相关问题
#!/bin/sh # Set the name of the primary network interface primary_interface="eth0" # Set the name of the secondary network interface secondary_interface="wlan0" # Set the IP address range of the local network local_network="192.168.1.0/24" primary_interface_table="eth0_table" # Keep running the script indefinitely while true; do # Check if the primary interface is up and connected to the local network if ip addr show $primary_interface up | grep -q $local_network; then # Add a new routing table for the primary interface echo "200 $primary_interface_table" >> /etc/iproute2/rt_tables # Add default route for primary interface to the new routing table primary_gateway=$(ip route show | grep "default" | grep "$primary_interface" | awk '{print $3}') ip route add default via $primary_gateway dev $primary_interface table $primary_interface_table # Add a rule to route all traffic from primary interface through the new routing table primary_ip=$(ip addr show $primary_interface | grep "inet\b" | awk '{print $2}' | cut -d/ -f1) ip rule add from $primary_ip table $primary_interface_table # Remove any existing default route for the secondary interface ip route del default dev $secondary_interface else # Remove any existing routing table for the primary interface existing_table=$(grep -n " $primary_interface_table" /etc/iproute2/rt_tables | cut -f1 -d:) if [ ! -z "$existing_table" ]; then sed -i "${existing_table}d" /etc/iproute2/rt_tables ip route flush table $primary_interface_table ip rule del table $primary_interface_table fi # Add default route for the secondary interface secondary_gateway=$(ip route show | grep "default" | grep "$secondary_interface" | awk '{print $3}') ip route add default via $secondary_gateway dev $secondary_interface fi # Wait for 1 second before checking the network interfaces again sleep 1 done 运行上述脚本,提示ip: RTNETLINK answers: File exists, 请问如何修正
这个错误通常是因为重复执行了相同的命令,导致 ip 路由表中已经存在相同的路由规则。你可以尝试先手动删除相应的路由规则和路由表,然后再重新执行脚本。具体操作如下:
1. 删除路由规则和路由表:
```
ip rule del from $primary_ip table $primary_interface_table
ip route flush table $primary_interface_table
sed -i "/^200 $primary_interface_table$/d" /etc/iproute2/rt_tables
```
2. 重新执行脚本。
如果还是出现相同的错误,你可以尝试重启网络服务,然后再执行脚本:
```
systemctl restart networking.service
```
while read line do key_value_ARR[$i]=$line if [[ ${key_value_ARR[$i]} =~ "IP" ]] then old_parameter_value[$i]=cat $file_NAME | grep ${key_value_ARR[$i]} | head -1 | cut -f2 -d ">" | cut -f1 -d "<" echo "Current $line value is:${old_parameter_value[$i]}" else old_parameter_value[$i]=cat $file_NAME | grep ${key_value_ARR[$i]} | head -1 | tr -cd "[0-9]" echo "Current $line value is:${old_parameter_value[$i]}" fi ((i+=1)) done<$key_value_FILE,优化这段代码
可以将重复的命令提取出来,同时使用 awk 命令代替 grep、cut、tr 等命令,从而简化代码并提高效率。重构后的代码如下:
```bash
while read line
do
key_value_ARR[$i]=$line
if [[ ${key_value_ARR[$i]} =~ "IP" ]]
then
old_parameter_value[$i]=$(awk -F'[<>]' "/${key_value_ARR[$i]}/{print \$3;exit}" $file_NAME)
echo "Current $line value is:${old_parameter_value[$i]}"
else
old_parameter_value[$i]=$(awk -F'[<>]' "/${key_value_ARR[$i]}/{print \$2;exit}" $file_NAME | tr -cd "[0-9]")
echo "Current $line value is:${old_parameter_value[$i]}"
fi
((i+=1))
done < $key_value_FILE
```
这样做可以简化代码,提高效率,并且更加易于阅读和维护。