FM中频广播信号用ADC进行带通采样的matlab代码
时间: 2024-05-25 07:17:25 浏览: 10
以下是一段简单的 MATLAB 代码,用于以中频采样的方式对 FM 广播信号进行带通采样:
% 设置采样频率和带宽
fs = 100e3; % 采样频率为100 kHz
bw = 10e3; % 带宽为10 kHz
% 生成带通滤波器
[b, a] = butter(6, [87.5e3 107.5e3]/(fs/2));
% 读取FM信号
[y, fs_fm] = audioread('fm_signal.wav'); % 假设 FM 信号已经通过调制后存储在“fm_signal.wav”文件中
% 下变频到中频
fc = 98e6; % FM 广播信号的中心频率为 98 MHz
y_if = y .* exp(-1j*2*pi*fc*(0:length(y)-1)/fs_fm);
% 带通滤波采样
y_if_bp = filter(b, a, y_if);
y_if_bp = y_if_bp(1:fs/bw:end);
% 保存采样后的信号
audiowrite('fm_signal_if_bp.wav', y_if_bp, fs/bw);
注意:这只是一个基本的示例代码。实际应用中,需要根据具体的信号特征和采样要求进行相应的优化和调整。
相关问题
10.7MHz的FM中频广播信号用ADC进行带通采样的matlab代码
以下是一个简单的MATLAB代码示例,用于使用ADC对10.7MHz的FM中频广播信号进行带通采样。
```
% 定义采样频率和带宽
Fs = 50e6; % 采样频率
f1 = 10.6e6; % 带通下限
f2 = 10.8e6; % 带通上限
BW = f2 - f1; % 带宽
% 生成采样时间序列
t = 0:1/Fs:1e-3; % 采样时间为1ms
% 生成信号
fm_signal = sin(2*pi*10.7e6*t); % FM中频广播信号
% 带通滤波
b = fir1(100, [f1, f2]/(Fs/2)); % 生成50阶FIR滤波器
filtered_signal = filter(b, 1, fm_signal);
% ADC采样
adc_signal = filtered_signal(1:100:end); % 降采样到500kHz
% 绘制结果
figure;
subplot(3,1,1);
plot(t*1e3, fm_signal);
xlabel('Time (ms)');
ylabel('Amplitude');
title('FM Intermediary Broadcast Signal');
subplot(3,1,2);
plot(t*1e3, filtered_signal);
xlabel('Time (ms)');
ylabel('Amplitude');
title('Bandpass Filtered Signal');
subplot(3,1,3);
plot(t(1:100:end)*1e3, adc_signal);
xlabel('Time (ms)');
ylabel('Amplitude');
title('ADC Sampled Signal');
```
这个代码示例假定输入信号是10.7MHz的FM中频广播信号,并且使用一个带通滤波器来选择10.6MHz到10.8MHz之间的频率分量。然后,采用FIR滤波器对信号进行滤波,最后对滤波后的信号进行降采样,以模拟ADC的采样过程。绘制了原始信号、滤波后的信号和采样后的信号的波形图,以便进行比较和分析。
FM10.7MHz的中频广播信号用ADC进行带通采样的matlab代码
以下是一个简单的MATLAB代码样例,用于进行FM广播信号的中频带通采样:
```matlab
% 设置采样参数
fs = 44100; % 采样频率
fc = 10.7e6; % 中频频率
bw = 200e3; % 带宽
% 生成带通滤波器
[b, a] = butter(10, [((fc-bw/2)/(fs/2)),((fc+bw/2)/(fs/2))], 'bandpass');
% 读取FM信号文件
filename = 'fm_signal.wav';
[x, fs] = audioread(filename);
% 中频带通采样
y = filter(b, a, x);
% 绘制原始信号和采样信号的频谱
N = length(x);
X = abs(fft(x))/N;
Y = abs(fft(y))/N;
f = linspace(0, fs, N);
figure;
subplot(2,1,1);
plot(f, X);
xlim([0, fc*2]);
title('原始信号频谱');
subplot(2,1,2);
plot(f, Y);
xlim([0, fc*2]);
title('中频带通采样信号频谱');
```
此代码将读取一个名为“fm_signal.wav”的文件,中频带通滤波后将其采样,并绘制原始信号和采样信号的频谱。请注意,此代码仅供参考,并且可能需要根据特定应用程序进行调整。
相关推荐
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![xlsx](https://img-home.csdnimg.cn/images/20210720083732.png)
![rar](https://img-home.csdnimg.cn/images/20210720083606.png)
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![rar](https://img-home.csdnimg.cn/images/20210720083606.png)
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![pdf](https://img-home.csdnimg.cn/images/20210720083512.png)