qt上位机传输文件给单片机
时间: 2023-07-12 07:08:55 浏览: 134
在Qt上位机中传输文件给单片机可以通过以下步骤实现:
1. 打开文件:使用QFile类打开需要传输的文件。
2. 读取数据:使用QDataStream类读取文件中的数据。
3. 将数据发送给单片机:使用串口通信将读取的数据发送给单片机。可以使用QSerialPort类实现串口通信。
4. 单片机接收数据:在单片机端实现串口通信,接收从上位机发送过来的数据。
5. 写入数据:将接收到的数据写入单片机的存储器中。
6. 关闭文件和串口:在传输完成后,关闭文件和串口。
下面是一个简单的示例代码:
```cpp
QFile file("test.txt"); // 打开文件
if (file.open(QIODevice::ReadOnly)) {
QDataStream in(&file); // 读取数据
QByteArray data = in.readAll();
file.close();
QSerialPort serial;
serial.setPortName("COM1"); // 设置串口号
serial.setBaudRate(QSerialPort::Baud115200); // 设置波特率
if (serial.open(QIODevice::ReadWrite)) {
serial.write(data); // 发送数据
serial.flush();
serial.close();
}
}
```
在单片机端,可以使用串口接收数据并将其写入存储器中:
```c
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <stdint.h>
#include "stm32f4xx.h"
#define BUFFER_SIZE 1024
uint8_t buffer[BUFFER_SIZE];
void USART2_IRQHandler(void) {
if (USART_GetITStatus(USART2, USART_IT_RXNE) != RESET) {
buffer[index++] = USART_ReceiveData(USART2);
}
}
int main(void) {
USART_InitTypeDef USART_InitStructure;
GPIO_InitTypeDef GPIO_InitStructure;
NVIC_InitTypeDef NVIC_InitStructure;
RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOA, ENABLE);
RCC_APB1PeriphClockCmd(RCC_APB1Periph_USART2, ENABLE);
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_2 | GPIO_Pin_3;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_UP;
GPIO_Init(GPIOA, &GPIO_InitStructure);
GPIO_PinAFConfig(GPIOA, GPIO_PinSource2, GPIO_AF_USART2);
GPIO_PinAFConfig(GPIOA, GPIO_PinSource3, GPIO_AF_USART2);
USART_InitStructure.USART_BaudRate = 115200;
USART_InitStructure.USART_WordLength = USART_WordLength_8b;
USART_InitStructure.USART_StopBits = USART_StopBits_1;
USART_InitStructure.USART_Parity = USART_Parity_No;
USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx;
USART_Init(USART2, &USART_InitStructure);
NVIC_InitStructure.NVIC_IRQChannel = USART2_IRQn;
NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0;
NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;
NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
NVIC_Init(&NVIC_InitStructure);
USART_ITConfig(USART2, USART_IT_RXNE, ENABLE);
USART_Cmd(USART2, ENABLE);
while (1) {
// 等待接收数据
while (index < BUFFER_SIZE);
// 将接收到的数据写入存储器中
// ...
index = 0;
}
}
```
相关推荐
![rar](https://img-home.csdnimg.cn/images/20210720083606.png)
![rar](https://img-home.csdnimg.cn/images/20210720083606.png)
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)