用C语言写一个基于stm32的温度监测系统
时间: 2023-12-28 20:03:24 浏览: 49
好的,以下是基于STM32的温度监测系统的C语言代码示例。
```c
#include "stm32f10x.h"
#include "stdio.h"
/* 定义温度传感器引脚 */
#define TEMP_SENSOR_PIN GPIO_Pin_0
#define TEMP_SENSOR_PORT GPIOA
/* 定义USART引脚 */
#define USART_TX_PIN GPIO_Pin_9
#define USART_RX_PIN GPIO_Pin_10
#define USART_PORT GPIOA
/* 定义波特率 */
#define USART_BAUDRATE 115200
/* 定义延时函数 */
void delay_ms(int n)
{
int i;
for(i=0;i<n;i++)
{
int j;
for(j=0;j<7200;j++);
}
}
/* 初始化USART */
void init_USART()
{
GPIO_InitTypeDef GPIO_InitStructure;
USART_InitTypeDef USART_InitStructure;
/* 使能USART和GPIO的时钟 */
RCC_APB2PeriphClockCmd(RCC_APB2Periph_USART1 | RCC_APB2Periph_GPIOA, ENABLE);
/* 配置USART的GPIO */
GPIO_InitStructure.GPIO_Pin = USART_TX_PIN;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_Init(USART_PORT, &GPIO_InitStructure);
GPIO_InitStructure.GPIO_Pin = USART_RX_PIN;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
GPIO_Init(USART_PORT, &GPIO_InitStructure);
/* 配置USART */
USART_InitStructure.USART_BaudRate = USART_BAUDRATE;
USART_InitStructure.USART_WordLength = USART_WordLength_8b;
USART_InitStructure.USART_StopBits = USART_StopBits_1;
USART_InitStructure.USART_Parity = USART_Parity_No;
USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx;
USART_Init(USART1, &USART_InitStructure);
/* 使能USART */
USART_Cmd(USART1, ENABLE);
}
/* 初始化温度传感器 */
void init_temp_sensor()
{
GPIO_InitTypeDef GPIO_InitStructure;
/* 使能GPIO的时钟 */
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA, ENABLE);
/* 配置GPIO */
GPIO_InitStructure.GPIO_Pin = TEMP_SENSOR_PIN;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_Init(TEMP_SENSOR_PORT, &GPIO_InitStructure);
}
/* 读取温度值 */
float read_temp()
{
float temp;
uint16_t temp_value;
/* 读取ADC的值 */
ADC_SoftwareStartConvCmd(ADC1, ENABLE);
while(!ADC_GetFlagStatus(ADC1, ADC_FLAG_EOC));
temp_value = ADC_GetConversionValue(ADC1);
/* 将ADC的值转换为温度值 */
temp = (float)temp_value * 3.3 / 4096;
temp = (temp - 0.76) / 0.0025 + 25;
return temp;
}
/* 主函数 */
int main(void)
{
/* 初始化USART和温度传感器 */
init_USART();
init_temp_sensor();
/* 初始化ADC */
RCC_APB2PeriphClockCmd(RCC_APB2Periph_ADC1, ENABLE);
ADC_InitTypeDef ADC_InitStructure;
ADC_InitStructure.ADC_Mode = ADC_Mode_Independent;
ADC_InitStructure.ADC_ScanConvMode = DISABLE;
ADC_InitStructure.ADC_ContinuousConvMode = ENABLE;
ADC_InitStructure.ADC_ExternalTrigConv = ADC_ExternalTrigConv_None;
ADC_InitStructure.ADC_DataAlign = ADC_DataAlign_Right;
ADC_InitStructure.ADC_NbrOfChannel = 1;
ADC_Init(ADC1, &ADC_InitStructure);
ADC_Cmd(ADC1, ENABLE);
ADC_RegularChannelConfig(ADC1, ADC_Channel_0, 1, ADC_SampleTime_55Cycles5);
/* 无限循环 */
while (1)
{
/* 读取温度值 */
float temp = read_temp();
/* 发送温度值到USART */
char str[20];
sprintf(str, "Temperature: %.2f\n", temp);
int i = 0;
while(str[i])
{
USART_SendData(USART1, str[i]);
while(USART_GetFlagStatus(USART1, USART_FLAG_TXE) == RESET);
i++;
}
/* 延时一段时间 */
delay_ms(1000);
}
}
```
这段代码初始化了USART、温度传感器和ADC,并且通过USART发送温度值。如果您需要更详细的解释或者有其他问题,欢迎随时提出。
相关推荐
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)