怎么使用DMA发送数据
时间: 2024-02-17 22:33:05 浏览: 20
DMA(Direct Memory Access)是一种无需CPU干预即可在外设和内存之间传输数据的技术,使用DMA可以提高数据传输效率。下面是使用DMA发送数据的一般步骤:
1. 配置DMA控制器:包括配置DMA通道、设置传输方向、设置传输数据类型、设置数据长度等。
2. 配置外设:将要发送的数据存放到外设的数据缓冲区中。
3. 配置内存:将要发送的数据存放到内存的数据缓冲区中。
4. 开始DMA传输:启动DMA传输,控制器将自动从内存中读取数据,通过外设总线将数据发送到外设。
下面是一个使用STM32F4的DMA发送数据的例子:
```c
// 配置DMA控制器
DMA_InitTypeDef DMA_InitStruct;
DMA_InitStruct.DMA_Channel = DMA_Channel_0; // 选择DMA通道
DMA_InitStruct.DMA_PeripheralBaseAddr = (uint32_t)&USART1->DR; // 外设地址
DMA_InitStruct.DMA_Memory0BaseAddr = (uint32_t)tx_buffer; // 内存地址
DMA_InitStruct.DMA_DIR = DMA_DIR_MemoryToPeripheral; // 设置传输方向
DMA_InitStruct.DMA_BufferSize = tx_len; // 数据长度
DMA_InitStruct.DMA_PeripheralInc = DMA_PeripheralInc_Disable; // 关闭外设地址自增功能
DMA_InitStruct.DMA_MemoryInc = DMA_MemoryInc_Enable; // 开启内存地址自增功能
DMA_InitStruct.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Byte; // 外设数据宽度为1字节
DMA_InitStruct.DMA_MemoryDataSize = DMA_MemoryDataSize_Byte; // 内存数据宽度为1字节
DMA_InitStruct.DMA_Mode = DMA_Mode_Normal; // 设置为非循环模式
DMA_InitStruct.DMA_Priority = DMA_Priority_High; // 设置DMA传输优先级为高
DMA_InitStruct.DMA_FIFOMode = DMA_FIFOMode_Disable; // 关闭FIFO模式
DMA_InitStruct.DMA_FIFOThreshold = DMA_FIFOThreshold_HalfFull;
DMA_InitStruct.DMA_MemoryBurst = DMA_MemoryBurst_Single;
DMA_InitStruct.DMA_PeripheralBurst = DMA_PeripheralBurst_Single;
DMA_Init(DMA2_Stream7, &DMA_InitStruct);
// 配置USART1
USART_InitTypeDef USART_InitStruct;
USART_InitStruct.USART_BaudRate = 115200;
USART_InitStruct.USART_WordLength = USART_WordLength_8b;
USART_InitStruct.USART_StopBits = USART_StopBits_1;
USART_InitStruct.USART_Parity = USART_Parity_No;
USART_InitStruct.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
USART_InitStruct.USART_Mode = USART_Mode_Tx;
USART_Init(USART1, &USART_InitStruct);
// 启动DMA传输
DMA_Cmd(DMA2_Stream7, ENABLE);
```
上述代码中,我们使用DMA2的Stream7通道向USART1发送数据。首先,我们使用DMA_InitTypeDef结构体配置DMA控制器,然后使用DMA_Init函数初始化DMA控制器。接着,我们使用USART_InitTypeDef结构体配置USART1,最后使用DMA_Cmd函数启动DMA传输。其中,tx_buffer为要发送的数据缓冲区指针,tx_len为要发送的数据长度。