openstack配置OVS桥接
时间: 2024-04-13 19:21:33 浏览: 13
根据提供的引用内容,以下是配置OpenStack OVS桥接的步骤:
1. 更新成功后重启虚拟机:
```shell
reboot
```
2. 安装openstack-packstack:
```shell
dnf install -y openstack-packstack
```
3. 配置OVS桥接的步骤可以参考OpenStack官方文档中的指南:[https://docs.openstack.org/newton/install-guide-ubuntu/neutron-compute-install.html](https://docs.openstack.org/newton/install-guide-ubuntu/neutron-compute-install.html)
相关问题
openstack ovs配置
OpenStack is an open-source cloud computing platform that provides infrastructure as a service (IaaS) for creating, deploying, and managing virtual machines and other resources. Open vSwitch (OVS) is a virtual switch used in OpenStack to provide network connectivity to virtual machines. Here's a general outline of the steps to configure OVS in OpenStack:
1. Install OpenStack: Follow the official installation guide for the OpenStack release you are using.
2. Install OVS: On each node in the OpenStack environment, install OVS. You can use a package manager such as apt-get or yum to install OVS.
3. Configure OVS: OVS needs to be configured on each node. You can use the following command to configure OVS to use the Open vSwitch database management system (OVSDB):
```
sudo ovs-vsctl set-manager tcp:<controller-IP>:6640
```
4. Create networks: In OpenStack, you can create virtual networks using Neutron, the OpenStack networking service. To create a virtual network, you need to create a network, a subnet, and a router. You can use the OpenStack CLI or the Horizon web interface to create these components.
5. Connect instances to the network: Once you have created a virtual network, you can launch instances and connect them to the network. You can do this by creating a network port and attaching it to an instance.
6. Configure security groups: OpenStack provides security groups to control access to instances. You can configure security groups to allow or deny access to instances based on IP addresses, protocols, and ports.
Note that this is just a general outline of the steps to configure OVS in OpenStack, and the exact steps may vary depending on the version of OpenStack you are using and the configuration of your environment. For more information and detailed instructions, refer to the OpenStack documentation.
openstack ovs原理
OpenStack是一个开源的云计算平台,其中的网络功能模块使用Open vSwitch(OVS)作为虚拟交换机。OVS是一个基于软件的虚拟交换机,它可以替代物理交换机来提供网络连通性。
OVS有两个主要组成部分:数据路径和控制路径。数据路径是负责转发数据包的部分,它直接与网络流量交互。控制路径是负责配置和管理数据路径的部分,它与OpenStack的网络控制器进行交互。
在OpenStack中,当一个虚拟机启动时,一个虚拟网卡会附加到它的虚拟机上。当虚拟机需要与其他虚拟机或外部网络通信时,数据包将被发送到OVS。OVS通过数据路径将数据包转发到正确的虚拟机或外部网络。
控制路径负责管理数据路径。当OpenStack的网络控制器需要创建或修改虚拟网络时,它会与OVS的控制路径进行交互。控制路径将根据控制器的指示配置数据路径,以确保网络连接的正确性和安全性。
总的来说,OVS在OpenStack中起到了关键作用,它能够提供虚拟网络连接,保证网络的可靠性和安全性。