k3588s 平台配置 AP6275 芯片，蓝牙配置DTS文件

好的，以下是一个可能的 AP6275 蓝牙配置的 DTS 文件示例：

&uart9 {
    pinctrl-names = "default";
    pinctrl-0 = <&pinctrl_uart9>;
    status = "okay";
};

&spi2 {
    pinctrl-names = "default";
    pinctrl-0 = <&pinctrl_spi2>;
    cs-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
    status = "okay";
};

&hci_uart {
    status = "okay";
    btreg-on-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
    btreg-reset-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
    wakeup-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
    firmware-name = "ap6275/fw_bcm43438a0.bin";
    firmware-name-sdio = "ap6275/fw_bcm43438a0.bin";
    firmware-name-sdio-s3 = "ap6275/fw_bcm43438a0.bin";
    firmware-name-sdio-s4 = "ap6275/fw_bcm43438a0.bin";
    firmware-name-sdio-s5 = "ap6275/fw_bcm43438a0.bin";
    firmware-name-sdio-s6 = "ap6275/fw_bcm43438a0.bin";
    firmware-name-sdio-s7 = "ap6275/fw_bcm43438a0.bin";
    firmware-name-sdio-s8 = "ap6275/fw_bcm43438a0.bin";
    firmware-name-sdio-s9 = "ap6275/fw_bcm43438a0.bin";
    firmware-name-sdio-s10 = "ap6275/fw_bcm43438a0.bin";
    firmware-name-sdio-s11 = "ap6275/fw_bcm43438a0.bin";
    firmware-name-sdio-s12 = "ap6275/fw_bcm43438a0.bin";
    firmware-name-sdio-s13 = "ap6275/fw_bcm43438a0.bin";
    firmware-name-sdio-s14 = "ap6275/fw_bcm43438a0.bin";
};

请根据实际硬件连接和需要进行相应的修改，例如更改 UART 和 SPI 的引脚配置，以及修改固件文件名等。同时，也需要确保设备树已正确加载并应用了该配置。