给我上述的温感连接代码keil

以下是基于Keil MDK开发环境的温感连接代码示例：

#include "stm32f10x.h"
#include "stdio.h"

#define ADC1_DR_Address    ((uint32_t)0x4001244C)

__IO uint16_t ADCConvertedValue;

void ADC1_Configuration(void);
void USART1_Configuration(void);

int main(void)
{
    char str[50];
    float temperature;

    ADC1_Configuration();
    USART1_Configuration();

    while (1)
    {
        ADC_SoftwareStartConvCmd(ADC1, ENABLE);
        while(ADC_GetFlagStatus(ADC1, ADC_FLAG_EOC) == RESET);

        ADCConvertedValue = ADC_GetConversionValue(ADC1);
        temperature = (float)ADCConvertedValue/4096*3.3/0.005;

        sprintf(str, "Temperature: %.1f C\r\n", temperature);
        USART_SendString(USART1, str);

        Delay(1000);
    }
}

void ADC1_Configuration(void)
{
    GPIO_InitTypeDef GPIO_InitStructure;
    ADC_InitTypeDef ADC_InitStructure;

    RCC_ADCCLKConfig(RCC_PCLK2_Div8);
    RCC_APB2PeriphClockCmd(RCC_APB2Periph_ADC1 | RCC_APB2Periph_GPIOA, ENABLE);

    GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0;
    GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AIN;
    GPIO_Init(GPIOA, &GPIO_InitStructure);

    ADC_InitStructure.ADC_Mode = ADC_Mode_Independent;
    ADC_InitStructure.ADC_ScanConvMode = DISABLE;
    ADC_InitStructure.ADC_ContinuousConvMode = DISABLE;
    ADC_InitStructure.ADC_ExternalTrigConv = ADC_ExternalTrigConv_None;
    ADC_InitStructure.ADC_DataAlign = ADC_DataAlign_Right;
    ADC_InitStructure.ADC_NbrOfChannel = 1;
    ADC_Init(ADC1, &ADC_InitStructure);

    ADC_RegularChannelConfig(ADC1, ADC_Channel_0, 1, ADC_SampleTime_55Cycles5);

    ADC_Cmd(ADC1, ENABLE);

    ADC_ResetCalibration(ADC1);
    while(ADC_GetResetCalibrationStatus(ADC1));

    ADC_StartCalibration(ADC1);
    while(ADC_GetCalibrationStatus(ADC1));
}

void USART1_Configuration(void)
{
    GPIO_InitTypeDef GPIO_InitStructure;
    USART_InitTypeDef USART_InitStructure;

    RCC_APB2PeriphClockCmd(RCC_APB2Periph_USART1 | RCC_APB2Periph_GPIOA, ENABLE);

    GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9;
    GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
    GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
    GPIO_Init(GPIOA, &GPIO_InitStructure);

    GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10;
    GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
    GPIO_Init(GPIOA, &GPIO_InitStructure);

    USART_InitStructure.USART_BaudRate = 115200;
    USART_InitStructure.USART_WordLength = USART_WordLength_8b;
    USART_InitStructure.USART_StopBits = USART_StopBits_1;
    USART_InitStructure.USART_Parity = USART_Parity_No;
    USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
    USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx;
    USART_Init(USART1, &USART_InitStructure);

    USART_Cmd(USART1, ENABLE);
}

void USART_SendString(USART_TypeDef* USARTx, char* string)
{
    while(*string)
    {
        while(USART_GetFlagStatus(USARTx, USART_FLAG_TXE) == RESET);
        USART_SendData(USARTx, *string++);
    }
}

void Delay(__IO uint32_t nCount)
{
    for(; nCount != 0; nCount--);
}

这段代码使用了STM32F10x系列单片机的ADC模块和USART模块，通过ADC采集温度传感器的信号，并将温度值通过串口传输到PC机上。需要注意的是，该示例仅供参考，实际应用中需要根据具体的硬件平台和传感器型号进行修改和优化。