使用C++写个串口助手
时间: 2023-10-24 19:23:10 浏览: 51
好的,我可以为您提供一份C语言写的串口助手的代码。以下是代码示例:
```
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <termios.h>
#include <unistd.h>
#include <fcntl.h>
int main(int argc, char **argv) {
if (argc != 2) {
printf("Usage: %s [/dev/ttyS0 | /dev/ttyS1 | ...]\n", argv[0]);
exit(EXIT_FAILURE);
}
char *serial_port = argv[1];
int serial_fd = open(serial_port, O_RDWR | O_NOCTTY | O_NDELAY);
if (serial_fd == -1) {
perror("open");
exit(EXIT_FAILURE);
}
struct termios options;
tcgetattr(serial_fd, &options);
cfsetspeed(&options, B9600);
options.c_cflag |= (CLOCAL | CREAD);
options.c_cflag &= ~PARENB;
options.c_cflag &= ~CSTOPB;
options.c_cflag &= ~CSIZE;
options.c_cflag |= CS8;
tcsetattr(serial_fd, TCSANOW, &options);
fcntl(serial_fd, F_SETFL, 0);
printf("Enter 'quit' to exit.\n");
while (1) {
printf(">> ");
fflush(stdout);
char input_buffer[256] = {0};
fgets(input_buffer, sizeof(input_buffer), stdin);
if (strncmp(input_buffer, "quit", 4) == 0) {
break;
}
write(serial_fd, input_buffer, strlen(input_buffer));
sleep(1);
char output_buffer[256] = {0};
ssize_t read_count = read(serial_fd, output_buffer, sizeof(output_buffer) - 1);
if (read_count > 0) {
printf("<< %s", output_buffer);
}
}
close(serial_fd);
return EXIT_SUCCESS;
}
```
这个串口助手的作用是在C语言中与串口通信,并将从串口收到的数据打印到控制台。您可以通过指定需要使用的串口设备的名称(如“/dev/ttyS0”)来运行此程序。程序将等待用户输入要发送到串口的数据,然后等待一个短时间以等待串口设备回复并将收到的数据打印到控制台。
请注意,这只是一个简单的示例程序。在实际情况下,您可能需要添加额外的错误检查和异常处理以确保程序正常运行。