STM32使用固件库接收字符串
时间: 2023-09-16 13:13:44 浏览: 38
在STM32使用固件库接收字符串,可以通过串口通信实现。以下是一个简单的接收字符串的示例代码:
```c
#include "stm32f10x.h"
#include <stdio.h>
#define BUFFER_SIZE 50
char buffer[BUFFER_SIZE];
int buffer_index = 0;
void USART1_IRQHandler(void)
{
if(USART_GetITStatus(USART1, USART_IT_RXNE) != RESET)
{
char data = USART_ReceiveData(USART1);
if(data == '\n' || data == '\r')
{
// 接收完成,处理接收到的字符串
buffer[buffer_index] = '\0'; // 字符串以'\0'结尾
printf("Received string: %s\n", buffer);
buffer_index = 0;
}
else
{
// 接收到一个字符,存储在缓冲区中
buffer[buffer_index++] = data;
if(buffer_index >= BUFFER_SIZE)
{
// 缓冲区已满,清空缓冲区
buffer_index = 0;
}
}
}
}
int main(void)
{
// 初始化串口
USART_InitTypeDef USART_InitStructure;
USART_DeInit(USART1);
USART_InitStructure.USART_BaudRate = 115200;
USART_InitStructure.USART_WordLength = USART_WordLength_8b;
USART_InitStructure.USART_StopBits = USART_StopBits_1;
USART_InitStructure.USART_Parity = USART_Parity_No;
USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx;
USART_Init(USART1, &USART_InitStructure);
USART_Cmd(USART1, ENABLE);
USART_ITConfig(USART1, USART_IT_RXNE, ENABLE);
NVIC_EnableIRQ(USART1_IRQn);
while(1)
{
// 主循环
// ...
}
}
```
该代码使用USART1串口接收数据。当接收到一个字符时,将其存储在缓冲区中,直到接收到换行符('\n'或'\r')为止。在接收完成后,将缓冲区中的数据作为字符串处理。需要注意的是,缓冲区大小应该足够大,以容纳接收到的字符串。在本例中,缓冲区大小为50个字符。
您可以根据自己的需求修改缓冲区大小和串口配置。