怎么使用sshd_config更改ssh的登录密码
时间: 2023-11-23 18:26:56 浏览: 48
要更改QNX系统中SSH登录密码,可以按照以下步骤进行操作:
1. 以root用户身份登录到QNX系统中。
2. 打开/etc/ssh/sshd_config文件,可以使用vi或其他文本编辑器进行编辑。
3. 找到"PermitRootLogin"和"PasswordAuthentication"两个选项,分别对应SSH允许root用户登录和密码验证功能。
4. 如果需要禁用密码验证功能,可以将"PasswordAuthentication"选项设置为"no"。
5. 如果需要允许root用户登录,可以将"PermitRootLogin"选项设置为"yes"。
6. 如果需要更改密码,可以在sshd_config文件中找到"PasswordAuthentication"选项下面的"PermitEmptyPasswords"选项,将其设置为"no",然后重启SSH服务。在重启SSH服务之后,使用"passwd"命令更改root用户的密码即可。
7. 保存更改并退出sshd_config文件。
8. 重启SSH服务,可以使用以下命令重启SSH服务:
```
# svcadm restart ssh
```
请注意,更改QNX系统中SSH登录密码时应格外小心,确保密码的安全性和可靠性。建议使用强密码,并定期更换密码。
相关问题
在/etc/ssh/sshd_config中配置ssh登录需要密码
要在`/etc/ssh/sshd_config`文件中配置SSH登录需要密码,您可以按照以下步骤进行操作:
1. 打开终端并以管理员身份登录到系统。
2. 使用文本编辑器(如vi、nano等)打开`/etc/ssh/sshd_config`文件。例如,使用以下命令打开该文件:
```
sudo vi /etc/ssh/sshd_config
```
3. 在文件中找到`#PasswordAuthentication yes`这一行,并将前面的注释符号“#”移除,将其设置为`PasswordAuthentication yes`。如果找不到此行,可以直接添加该行。
4. 保存文件并退出编辑器。
5. 重新加载SSH配置以使更改生效。使用以下命令重新加载SSH服务:
```
sudo systemctl reload sshd
```
现在,您的SSH登录将需要密码进行身份验证。请确保设置强密码并妥善保管以确保系统安全性。
逐条注释 ``` if grep -q "Protocol" /etc/ssh/sshd_config then sed -i '/Protocol/s/^#//' /etc/ssh/sshd_config sed -i "s/Protocol.*/Protocol 2/g" /etc/ssh/sshd_config else echo 'Protocol 2' >> /etc/ssh/sshd_config fi if grep -q "PrintMotd" /etc/ssh/sshd_config then sed -i '/PrintMotd/s/^#//' /etc/ssh/sshd_config sed -i "s/PrintMotd.*/PrintMotd yes/g" /etc/ssh/sshd_config else echo "PrintMotd yes" >> /etc/ssh/sshd_config fi service sshd restart systemctl restart sshd.service ```
这段脚本的作用是修改/etc/ssh/sshd_config文件中的SSH配置,并重新启动SSH服务。具体解释如下:
```shell
if grep -q "Protocol" /etc/ssh/sshd_config
then
sed -i '/Protocol/s/^#//' /etc/ssh/sshd_config
sed -i "s/Protocol.*/Protocol 2/g" /etc/ssh/sshd_config
else
echo 'Protocol 2' >> /etc/ssh/sshd_config
fi
```
- 检查/etc/ssh/sshd_config文件中是否存在"Protocol"这一行。
- 如果存在,则使用sed命令将该行的行首的注释符号#去掉,即取消注释。
- 然后使用sed命令将该行的值修改为"Protocol 2",即设置SSH协议版本为2。
- 如果不存在,则在文件末尾添加一行"Protocol 2"。
```shell
if grep -q "PrintMotd" /etc/ssh/sshd_config
then
sed -i '/PrintMotd/s/^#//' /etc/ssh/sshd_config
sed -i "s/PrintMotd.*/PrintMotd yes/g" /etc/ssh/sshd_config
else
echo "PrintMotd yes" >> /etc/ssh/sshd_config
fi
```
- 检查/etc/ssh/sshd_config文件中是否存在"PrintMotd"这一行。
- 如果存在,则使用sed命令将该行的行首的注释符号#去掉,即取消注释。
- 然后使用sed命令将该行的值修改为"PrintMotd yes",即启用SSH登录时显示欢迎信息。
- 如果不存在,则在文件末尾添加一行"PrintMotd yes"。
```shell
service sshd restart
systemctl restart sshd.service
```
- 重新启动SSH服务,使配置生效。这两行命令可能根据Linux发行版的不同而有所区别,用于重启SSH服务。