make menuconifg中的< > SDIO UART/GPS class support 介绍

时间: 2024-06-04 16:07:31 浏览: 226

rtl8189es_r16m验证通过20170818_1659没有外层目录.7z

全志R16平台的Android6系统下调通rtl8189es 2017/8/28 9:41 版本：V1.1 1、干掉BT选项： Q:\r16m\rtl8189es_r16m\Android\device\softwinner\astar-evb30\overlay\frameworks\base\core\res\res\values\config.xml   <string-array translatable="false" name="config_tether_bluetooth_regexs"> <item>"bt-pan"</item> </string-array> 2、 Q:\r16m\rtl8189es_r16m\android\device\softwinner\astar-evb30\astar_evb30.mk $(call inherit-product, build/target/product/full_base.mk) $(call inherit-product, device/softwinner/astar-common/astar-common.mk) $(call inherit-product-if-exists, device/softwinner/astar-evb30/modules/modules.mk) DEVICE_PACKAGE_OVERLAYS := device/softwinner/astar-evb30/overlay \ $(DEVICE_PACKAGE_OVERLAYS) PRODUCT_PACKAGES += Launcher3 PRODUCT_PACKAGES += \ ESFileExplorer \ VideoPlayer #Bluetooth # PartnerChromeCustomizationsProvider PRODUCT_COPY_FILES += \ device/softwinner/astar-evb30/kernel:kernel \ device/softwinner/astar-evb30/fstab.sun8i:root/fstab.sun8i \ device/softwinner/astar-evb30/init.sun8i.rc:root/init.sun8i.rc \ device/softwinner/astar-evb30/init.recovery.sun8i.rc:root/init.recovery.sun8i.rc \ device/softwinner/astar-evb30/ueventd.sun8i.rc:root/ueventd.sun8i.rc \ device/softwinner/astar-evb30/recovery.fstab:recovery.fstab \ device/softwinner/astar-evb30/modules/modules/nand.ko:root/nand.ko \ device/softwinner/astar-evb30/modules/modules/disp.ko:root/disp.ko \ device/softwinner/astar-evb30/modules/modules/lcd.ko:root/lcd.ko \ device/softwinner/astar-evb30/modules/modules/gslX680new.ko:root/gslX680new.ko \ device/softwinner/astar-evb30/modules/modules/sunxi-keyboard.ko:root/sunxi-keyboard.ko \ device/softwinner/astar-evb30/modules/modules/sw-device.ko:root/sw-device.ko \ device/softwinner/astar-evb30/modules/modules/sunxi-keyboard.ko:obj/sunxi-keyboard.ko \ device/softwinner/astar-evb30/modules/modules/sw-device.ko:obj/sw-device.ko \ device/softwinner/astar-evb30/modules/modules/gslX680new.ko:obj/gslX680new.ko PRODUCT_COPY_FILES += \ frameworks/native/data/etc/android.hardware.camera.xml:system/etc/permissions/android.hardware.camera.xml \ frameworks/native/data/etc/android.hardware.camera.front.xml:system/etc/permissions/android.hardware.camera.front.xml \ frameworks/native/data/etc/android.hardware.ethernet.xml:system/etc/permissions/android.hardware.ethernet.xml #frameworks/native/data/etc/android.hardware.bluetooth.xml:system/etc/permissions/android.hardware.bluetooth.xml # Low mem(memory <= 512M) device should not copy android.software.managed_users.xml #PRODUCT_COPY_FILES += \ # frameworks/native/data/etc/android.software.managed_users.xml:system/etc/permissions/android.software.managed_users.xml PRODUCT_COPY_FILES += \ device/softwinner/astar-evb30/configs/camera.cfg:system/etc/camera.cfg \ device/softwinner/astar-evb30/configs/gsensor.cfg:system/usr/gsensor.cfg \ device/softwinner/astar-evb30/configs/media_profiles.xml:system/etc/media_profiles.xml \ device/softwinner/astar-evb30/configs/sunxi-keyboard.kl:system/usr/keylayout/sunxi-keyboard.kl \ device/softwinner/astar-evb30/configs/tp.idc:system/usr/idc/tp.idc #PRODUCT_COPY_FILES += \ # device/softwinner/astar-evb30/bluetooth/bt_vendor.conf:system/etc/bluetooth/bt_vendor.conf # bootanimation PRODUCT_COPY_FILES += \ device/softwinner/astar-evb30/media/bootanimation.zip:system/media/bootanimation.zip # camera config for camera detector #PRODUCT_COPY_FILES += \ # device/softwinner/astar-evb30/hawkview/sensor_list_cfg.ini:system/etc/hawkview/sensor_list_cfg.ini # Radio Packages and Configuration Flie $(call inherit-product, device/softwinner/common/rild/radio_common.mk) #$(call inherit-product, device/softwinner/common/ril_modem/huawei/mu509/huawei_mu509.mk) #$(call inherit-product, device/softwinner/common/ril_modem/Oviphone/em55/oviphone_em55.mk) #PRODUCT_PROPERTY_OVERRIDES += \ # limit dex2oat threads to improve thermals PRODUCT_PROPERTY_OVERRIDES += \ dalvik.vm.boot-dex2oat-threads=4 \ dalvik.vm.dex2oat-threads=3 \ dalvik.vm.image-dex2oat-threads=4 # Realtek wifi efuse map #PRODUCT_COPY_FILES += \ # device/softwinner/astar-d7/wifi_efuse_8723bs-vq0.map:system/etc/wifi/wifi_efuse_8723bs-vq0.map PRODUCT_PROPERTY_OVERRIDES += \ dalvik.vm.dex2oat-flags=--no-watch-dog \ dalvik.vm.jit.codecachesize=0 \ ro.am.reschedule_service=true PRODUCT_PROPERTY_OVERRIDES += \ ro.frp.pst=/dev/block/by-name/frp PRODUCT_PROPERTY_OVERRIDES += \ persist.sys.usb.config=mass_storage,adb \ ro.adb.secure=0 \ ro.sys.mutedrm=true \ rw.logger=0 # A33 Media PRODUCT_PROPERTY_OVERRIDES += \ ro.config.media=1 PRODUCT_PROPERTY_OVERRIDES += \ dalvik.vm.heapsize=384m \ dalvik.vm.heapstartsize=8m \ dalvik.vm.heapgrowthlimit=80m \ dalvik.vm.heaptargetutilization=0.75 \ dalvik.vm.heapminfree=512k \ dalvik.vm.heapmaxfree=8m \ ro.zygote.disable_gl_preload=false #PRODUCT_PROPERTY_OVERRIDES += \ # ro.config.low_ram=true PRODUCT_PROPERTY_OVERRIDES += \ ro.sf.lcd_density=213 PRODUCT_PROPERTY_OVERRIDES += \ persist.sys.timezone=Asia/Shanghai \ persist.sys.country=CN \ persist.sys.language=zh # stoarge PRODUCT_PROPERTY_OVERRIDES += \ persist.fw.force_adoptable=true PRODUCT_CHARACTERISTICS := tablet PRODUCT_AAPT_CONFIG := mdpi PRODUCT_AAPT_PREF_CONFIG := mdpi #$(call inherit-product-if-exists, vendor/google/products/gms_base.mk) #for 8723bs-vq0,should setmacaddr #PRODUCT_PACKAGES += setmacaddr PRODUCT_BRAND := Allwinner PRODUCT_NAME := astar_evb30 PRODUCT_DEVICE := astar-evb30 PRODUCT_MODEL := QUAD-CORE R16 evb30 PRODUCT_MANUFACTURER := Allwinner 3、在这里配置你所使用的WIFI+BT： Q:\r16m\rtl8189es_r16m\android\device\softwinner\astar-evb30\BoardConfig.mk # wifi and bt configuration # 1. Wifi Configuration # 1.1 realtek wifi support # 1.1 realtek wifi configuration # BOARD_USR_WIFI: rtl8188eu/rtl8723bs/rtl8723bs_vq0/rtl8723cs BOARD_WIFI_VENDOR := realtek ifeq ($(BOARD_WIFI_VENDOR), realtek) WPA_SUPPLICANT_VERSION := VER_0_8_X BOARD_WPA_SUPPLICANT_DRIVER := NL80211 BOARD_WPA_SUPPLICANT_PRIVATE_LIB := lib_driver_cmd_rtl BOARD_HOSTAPD_DRIVER := NL80211 BOARD_HOSTAPD_PRIVATE_LIB := lib_driver_cmd_rtl #BOARD_USR_WIFI := rtl8723bs_vq0 #BOARD_USR_WIFI := rtl8188eu BOARD_USR_WIFI := rtl8189es include hardware/realtek/wlan/config/config.mk endif # 1.2 broadcom wifi support #BOARD_WIFI_VENDOR := broadcom ifeq ($(BOARD_WIFI_VENDOR), broadcom) BOARD_WPA_SUPPLICANT_DRIVER := NL80211 WPA_SUPPLICANT_VERSION := VER_0_8_X BOARD_WPA_SUPPLICANT_PRIVATE_LIB := lib_driver_cmd_bcmdhd BOARD_HOSTAPD_DRIVER := NL80211 BOARD_HOSTAPD_PRIVATE_LIB := lib_driver_cmd_bcmdhd BOARD_WLAN_DEVICE := bcmdhd WIFI_DRIVER_FW_PATH_PARAM := "/sys/module/bcmdhd/parameters/firmware_path" BOARD_USR_WIFI := ap6212 include hardware/broadcom/wlan/bcmdhd/firmware/$(BOARD_USR_WIFI)/device-bcm.mk endif ## 2. Bluetooth Configuration ## make sure BOARD_HAVE_BLUETOOTH is true for every bt vendor #BOARD_HAVE_BLUETOOTH := true #BOARD_HAVE_BLUETOOTH_BCM := true #BOARD_HAVE_BLUETOOTH_NAME := ap6212 #BOARD_BLUETOOTH_BDROID_BUILDCFG_INCLUDE_DIR := device/softwinner/astar-evb30/bluetooth TARGET_USE_BOOSTUP_OPZ := true 4、 Q:\r16m\rtl8189es_r16m\android\device\softwinner\astar-evb30\init.sun8i.rc ## bluetooth # # UART device # chmod 0660 /dev/ttyS1 # chown bluetooth net_bt_stack /dev/ttyS1 # # # power up/down interface # chmod 0660 /sys/class/rfkill/rfkill0/state # chmod 0660 /sys/class/rfkill/rfkill0/type # chown bluetooth net_bt_stack /sys/class/rfkill/rfkill0/state # chown bluetooth net_bt_stack /sys/class/rfkill/rfkill0/type # # # bluetooth MAC address programming # chown bluetooth net_bt_stack ro.bt.bdaddr_path # chown bluetooth net_bt_stack /system/etc/bluetooth # chown bluetooth net_bt_stack /data/misc/bluetooth # setprop ro.bt.bdaddr_path "/data/misc/bluetooth/bdaddr" # # # bluetooth LPM # chmod 0220 /proc/bluetooth/sleep/lpm # chmod 0220 /proc/bluetooth/sleep/btwrite # chown bluetooth net_bt_stack /proc/bluetooth/sleep/lpm # chown bluetooth net_bt_stack /proc/bluetooth/sleep/btwrite ## broadcom wifi service ## 1 broadcom wifi sta service #service wpa_supplicant /system/bin/wpa_supplicant \ # -iwlan0 -Dnl80211 -c/data/misc/wifi/wpa_supplicant.conf \ # -I/system/etc/wifi/wpa_supplicant_overlay.conf \ # -O/data/misc/wifi/sockets \ # -e/data/misc/wifi/entropy.bin -g@android:wpa_wlan0 # # we will start as root and wpa_supplicant will switch to user wifi # # after setting up the capabilities required for WEXT # # user wifi # # group wifi inet keystore # class main # socket wpa_wlan0 dgram 660 wifi wifi # disabled # oneshot # ## 2 broadcom wifi sta p2p concurrent service #service p2p_supplicant /system/bin/wpa_supplicant \ # -iwlan0 -Dnl80211 -c/data/misc/wifi/wpa_supplicant.conf \ # -I/system/etc/wifi/wpa_supplicant_overlay.conf \ # -O/data/misc/wifi/sockets -N \ # -ip2p0 -Dnl80211 -c/data/misc/wifi/p2p_supplicant.conf \ # -I/system/etc/wifi/p2p_supplicant_overlay.conf \ # -puse_p2p_group_interface=1 -e/data/misc/wifi/entropy.bin \ # -g@android:wpa_wlan0 # # we will start as root and wpa_supplicant will switch to user wifi # # after setting up the capabilities required for WEXT # # user wifi # # group wifi inet keystore # class main # socket wpa_wlan0 dgram 660 wifi wifi # disabled # oneshot # realtek wifi service service wpa_supplicant /system/bin/logwrapper /system/bin/wpa_supplicant \ -iwlan0 -Dnl80211 -c/data/misc/wifi/wpa_supplicant.conf \ -O/data/misc/wifi/sockets \ -e/data/misc/wifi/entropy.bin -g@android:wpa_wlan0 class main socket wpa_wlan0 dgram 660 wifi wifi disabled oneshot # 1.2 realtek wifi sta p2p concurrent service service p2p_supplicant /system/bin/logwrapper /system/bin/wpa_supplicant \ -ip2p0 -Dnl80211 -c/data/misc/wifi/p2p_supplicant.conf \ -e/data/misc/wifi/entropy.bin -N \ -iwlan0 -Dnl80211 -c/data/misc/wifi/wpa_supplicant.conf \ -O/data/misc/wifi/sockets \ -g@android:wpa_wlan0 class main socket wpa_wlan0 dgram 660 wifi wifi disabled oneshot 5、可选：为了调试方便 Q:\r16m\rtl8189es_r16m\android\frameworks\base\packages\SettingsProvider\res\values\defaults.xml <integer name="def_screen_off_timeout">60000</integer> <bool name="def_lockscreen_disabled">false</bool> 修改为： <integer name="def_screen_off_timeout">1800000</integer> <bool name="def_lockscreen_disabled">true</bool> 6、解决编译不过的问题。rtl8189es没有BT： Q:\r16m\rtl8189es_r16m\android\hardware\realtek\bluetooth\firmware\rtlbtfw_cfg.mk PRODUCT_COPY_FILES += \ $(LOCAL_PATH)/rtl8723a_fw:system/etc/firmware/rtl8723as_fw \ $(LOCAL_PATH)/rtl8723a_config:system/etc/firmware/rtl8723as_config \ $(LOCAL_PATH)/rtl8723b_fw:system/etc/firmware/rtl8723bs_fw \ $(LOCAL_PATH)/rtl8723b_config:system/etc/firmware/rtl8723bs_config \ $(LOCAL_PATH)/rtl8723b_VQ0_fw:system/etc/firmware/rtl8723bs_VQ0_fw \ $(LOCAL_PATH)/rtl8723b_VQ0_config:system/etc/firmware/rtl8723bs_VQ0_config \ $(LOCAL_PATH)/rtl8723cs_xx_fw:system/etc/firmware/rtl8723cs_xx_fw \ $(LOCAL_PATH)/rtl8723cs_xx_config:system/etc/firmware/rtl8723cs_xx_config \ $(LOCAL_PATH)/rtl8723cs_cg_fw:system/etc/firmware/rtl8723cs_cg_fw \ $(LOCAL_PATH)/rtl8723cs_cg_config:system/etc/firmware/rtl8723cs_cg_config \ $(LOCAL_PATH)/rtl8723cs_vf_fw:system/etc/firmware/rtl8723cs_vf_fw \ $(LOCAL_PATH)/rtl8723cs_vf_config:system/etc/firmware/rtl8723cs_vf_config \ $(LOCAL_PATH)/rtl8703b_fw:system/etc/firmware/rtl8703bs_fw \ $(LOCAL_PATH)/rtl8703b_config:system/etc/firmware/rtl8703bs_config #$(TOP_DIR)device/softwinner/$(basename $(TARGET_DEVICE))/bluetooth/rtkbt.conf:system/etc/bluetooth/rtkbt.conf \ 7、默认的BSP没有加载rtl8189es Q:\r16m\rtl8189es_r16m\android\hardware\libhardware_legacy\wifi\Android.mk # realtek sdio wifi module ifeq ($(BOARD_USR_WIFI), rtl8189fs) LOCAL_CFLAGS += -DRTL_8189FS_WIFI_USED LOCAL_CFLAGS += -DRTL_WIFI_VENDOR endif # realtek sdio wifi module ifeq ($(BOARD_USR_WIFI), rtl8189es) LOCAL_CFLAGS += -DRTL_8189ES_WIFI_USED LOCAL_CFLAGS += -DRTL_WIFI_VENDOR endif Q:\r16m\rtl8189es_r16m\android\hardware\libhardware_legacy\wifi\wifi.c #elif defined RTL_8189FS_WIFI_USED /* rtl8189FS sdio wifi */ #ifndef WIFI_DRIVER_MODULE_PATH #define WIFI_DRIVER_MODULE_PATH "/system/vendor/modules/8189fs.ko" #endif #ifndef WIFI_DRIVER_MODULE_NAME #define WIFI_DRIVER_MODULE_NAME "8189fs" #endif #ifndef WIFI_DRIVER_MODULE_ARG #define WIFI_DRIVER_MODULE_ARG "ifname=wlan0 if2name=p2p0" #endif #elif defined RTL_8189ES_WIFI_USED /* rtl8189ES sdio wifi */ #ifndef WIFI_DRIVER_MODULE_PATH #define WIFI_DRIVER_MODULE_PATH "/system/vendor/modules/8189es.ko" #endif #ifndef WIFI_DRIVER_MODULE_NAME #define WIFI_DRIVER_MODULE_NAME "8189es" #endif #ifndef WIFI_DRIVER_MODULE_ARG #define WIFI_DRIVER_MODULE_ARG "ifname=wlan0 if2name=p2p0" #endif #elif defined ESPRESSIF_ESP8089_WIFI_USED /* esp8089 sdio wifi */ #ifndef WIFI_DRIVER_MODULE_PATH #define WIFI_DRIVER_MODULE_PATH "/system/vendor/modules/esp8089.ko" #endif #ifndef WIFI_DRIVER_MODULE_NAME #define WIFI_DRIVER_MODULE_NAME "esp8089" #endif #ifndef WIFI_DRIVER_MODULE_ARG #define WIFI_DRIVER_MODULE_ARG "" #endif #endif 8、WIFI+BT的驱动识别： Q:\r16m\rtl8189es_r16m\lichee\Linux-3.4\drivers\misc\rf_pm\bt_pm.c static int rfkill_set_power(void *data, bool blocked) { unsigned int mod_sel = get_rf_mod_type(); RF_MSG("rfkill set power %d\n", !blocked); switch (mod_sel){ case 2: /* ap6210 */ case 5: /* rtl8723bs */ case 7: /* ap6476 */ case 8: /* ap6330 */ case 9: /* gb9663 */ case 10: /* ap6212 */ if (!blocked) { if(bt_rst_n != -1) gpio_set_value(bt_rst_n, 1); } else { if(bt_rst_n != -1) gpio_set_value(bt_rst_n, 0); } break; default: RF_MSG("no bt module matched !!\n"); } bt_state = !blocked; msleep(10); return 0; } Q:\r16m\rtl8189es_r16m\lichee\linux-3.4\drivers\misc\rf_pm\rf_pm.c char *module_list[] = { " ", "ap6181", "ap6210", "rtl8188eu", "rtl8723au", "rtl8723bs", "esp8089", "ap6476", "ap6330", "gb9663", "ap6212", "rtl8189es" }; static int rf_pm_probe(struct platform_device *pdev) { get_module_res(); if (mod_info.num <= 0) return -1; //moduls power init switch(mod_info.num){ case 1: /* ap6181 */ case 2: /* ap6210 */ case 5: /* rtl8723bs */ case 6: /* esp8089 */ case 7: /* ap6476 */ case 8: /* ap6330 */ case 9: /* gb9663 */ case 10: /* ap6212 */ case 11: /* rtl8189es */ rf_module_power(1); break; case 3: /* rtl8188eu */ case 4: /* rtl8723au */ rf_module_power(0); break; default: rf_pm_msg("wrong module select %d !\n", mod_info.num); } //opt ap 32k if(mod_info.lpo_use_apclk && strcmp(mod_info.lpo_use_apclk, "")){ ap_32k = clk_get(NULL, mod_info.lpo_use_apclk); if (!ap_32k || IS_ERR(ap_32k)){ rf_pm_msg("get clk %s failed!\n", mod_info.lpo_use_apclk); return -1; } rf_pm_msg("set %s 32k out\n", mod_info.lpo_use_apclk); enable_ap_32k(1); } scene_lock_init(&gpio_hold_standby, SCENE_GPIO_HOLD_STANDBY, "rf_pm"); return 0; } Q:\r16m\rtl8189es_r16m\lichee\linux-3.4\drivers\misc\rf_pm\wifi_pm.c void wifi_pm_power(int on) { int mod_num = get_rf_mod_type(); int on_off = 0; if (on > 0){ on_off = 1; } else { on_off = 0; } wifi_pm_msg("wifi power %s\n", on?"on":"off"); switch(mod_num){ case 1: /* ap6181 */ case 2: /* ap6210 */ case 5: /* rtl8723bs */ case 6: /* esp8089 */ case 7: /* ap6476 */ case 8: /* ap6330 */ case 9: /* gb9663*/ case 10: /* ap6212 */ case 11: /* rtl8189es */ if (wl_info.wl_reg_on != -1) gpio_set_value(wl_info.wl_reg_on, on_off); break; case 3: /* rtl8188eu */ rf_module_power(on_off); break; case 4: /* rtl8723au */ break; default: wifi_pm_msg("wrong module select %d !\n", mod_num); } wl_info.wl_power_state = on_off; wifi_state = on_off; } EXPORT_SYMBOL(wifi_pm_power); 9、直接使用全志R16平台的parrot v1.1系统下的rtl8189es驱动代替。Android6.0.1自带的驱动貌似有问题！ Q:\r16m\rtl8189es_r16m\lichee\linux-3.4\drivers\net\wireless\rtl8189es\ rootroot@rootroot-E400:~/wyb/rtl8189es_r16m$ 7za x rtl8189es_r16m验证通过20170818_1659没有外层目录.7z -r -o./ rootroot@rootroot-E400:~/wyb/rtl8189es_r16m$ cd lichee/linux-3.4/drivers/net/wireless/ rootroot@rootroot-E400:~/wyb/rtl8189es_r16m/lichee/linux-3.4/drivers/net/wireless$ rootroot@rootroot-E400:~/wyb/rtl8189es_r16m/lichee/linux-3.4/drivers/net/wireless$ rm rtl8189es -rf rootroot@rootroot-E400:~/wyb/rtl8189es_r16m/lichee/linux-3.4/drivers/net/wireless$ tar zxvf rtl8189es4.tar.gz 10、可选操作：为了调试方便 Q:\r16m\rtl8189es_r16m\lichee\tools\pack\chips\sun8iw5p1\configs\default\env.cfg #kernel command arguments console=ttyS0,115200 nand_root=/dev/nandd mmc_root=/dev/mmcblk0p7 init=/init loglevel=8 #set kernel cmdline if boot.img or recovery.img has no cmdline we will use this setargs_nand=setenv bootargs console=${console} root=${nand_root} init=${init} ion_cma_list="120m,256m" loglevel=${loglevel} partitions=${partitions} setargs_mmc=setenv bootargs console=${console} root=${mmc_root} init=${init} ion_cma_list="120m,256m" loglevel=${loglevel} partitions=${partitions} #nand command syntax: sunxi_flash read address partition_name read_bytes #0x40007800 = 0x40008000(kernel entry) - 0x800(boot.img header 2k) boot_normal=sunxi_flash read 40007800 boot;boota 40007800 boot_recovery=sunxi_flash read 40007800 recovery;boota 40007800 boot_fastboot=fastboot #recovery key recovery_key_value_max=0x13 recovery_key_value_min=0x10 #fastboot key fastboot_key_value_max=0x8 fastboot_key_value_min=0x2 #uboot system env config bootdelay=3 #default bootcmd, will change at runtime according to key press bootcmd=run setargs_nand boot_normal#default nand boot 11、 Q:\r16m\rtl8189es_r16m\lichee\tools\pack\chips\sun8iw5p1\configs\evb-30\sys_config.fex ;--------------------------------------------------------------------------------------------------------- ; wakeup_src_para: ; sometimes, u would like to add more wakeup src in standby mode, these para will be ; help; ; u need to make sure the standby mode support the wakeup src. Also, some hw ; condition must be guaranteed. ; including: ; cpu_en: power on or off. ; 1: mean power on ; 0: mean power off ; cpu_freq: indicating lowest freq. unit is Mhz; ; dram selfresh_en: selfresh or not. ; 1: enable enter selfresh ; 0: disable enter selfresh ; dram_pll: if not enter selfresh, indicating lowest freq. unit is Mhz; ; wakeup_src: to make the scenario work, the wakeup src is needed. ;--------------------------------------------------------------------------------------------------------- [wakeup_src_para] cpu_en = 0 cpu_freq = 48 ; (cpu:apb:ahb) pll_ratio = 0x111 dram_selfresh_en= 1 dram_freq = 36 wakeup_src_wl = port:PL07<4><default><default><0> ;wakeup_src_bt = port:PL09<4><default><default><0> bb_wake_ap = port:PL02<4><default><default><0> ;-------------------------------------------------------------------------------- ;wifi/bt/fm/gps/nfc modules configuration ;module_num: ; 0- none ; 1- ap6181(wifi) ; 2- ap6210/ap6212(wifi+bt) ; 3- rtl8188eu(wifi) ; 4- rtl8723au(wifi+bt) ; 5- rtl8723bs/rtl8723bs-vq0(wifi+bt) ; 6- esp8089(wifi) ; 7- ap6476(wifi+bt+fm+gps) ; 8- ap6330(wifi+bt+fm) ; 9- gb9663(wifi+bt+fm) ; 10- ap6212(wifi+bt) ; 11- rtl8189es(wifi) ;module_power1: ""- bat, "axp_dldo1"- axp dldo1 ;module_power1_vol: power1 voltage, mv; not used for module_power1 is "" ;module_power2: ""- bat, "axp_dldo2"- axp dldo2 ;module_power2_vol: power2 voltage, mv; not used for module_power2 is "" ;module_power3: ""- bat, "axp_dldo2"- axp dldo2 ;module_power3_vol: power3 voltage, mv; not used for module_power3 is "" ;power_switch: module power switch io when bat supply ;chip_en: enable chip io ;lpo_use_apclk: ""- not use, "losc_out"- a23/33, "ac10032k1"?"ac10032k2"?"ac10032k3"- a80/a83 ;-------------------------------------------------------------------------------- [rf_para] module_num = 11 module_power1 = "axp22_dldo1" module_power1_vol = 3300000 module_power2 = "axp22_dldo2" module_power2_vol = 3300000 module_power3 = "axp22_aldo1" module_power3_vol = 3300000 power_switch = chip_en = lpo_use_apclk = "losc_out" ;-------------------------------------------------------------------------------- ;wifi configuration ;wifi_used: 0-not use, 1- use ;wifi_sdc_id: 0- SDC0, 1- SDC1, 2- SDC2, 3- SDC3 ;wifi_usbc_id: 0- USB0, 1- USB1, 2- USB2 ;wifi_usbc_type: 1- EHCI(speed 2.0), 2- OHCI(speed 1.0) ;wl_reg_on: wifi function enable io ;wl_host_wake: wifi device wake-up host ;wl_host_wake_invert: whether wl_host_wake use inverter between ap and module ; 0: not used, 1: used ;-------------------------------------------------------------------------------- [wifi_para] wifi_used = 1 wifi_sdc_id = 1 wifi_usbc_id = 1 wifi_usbc_type = 1 wl_reg_on = port:PL06<1><default><default><0> wl_host_wake = port:PL07<4><default><default><0> rtl8189es_host_wake = port:PL07<4><default><default><0> wl_host_wake_invert = 0 ;-------------------------------------------------------------------------------- ;bluetooth configuration ;bt_used: 0- no used, 1- used ;bt_uard_id: 0- uart0, 1- uart1, 2- uart2 ;bt_rst_n: bt function enable io ;bt_wake: host wake-up bluetooth device ;bt_wak_host: bt device wake-up host ;bt_host_wake_invert: whether bt_host_wake use inverter between ap and module ; 0: not used, 1: used ;-------------------------------------------------------------------------------- [bt_para] bt_used = 0 ;bt_uart_id = 1 ;bt_rst_n = port:PL08<1><default><default><0> ;bt_wake = port:PL10<1><default><default><0> ;bt_host_wake = port:PL09<4><default><default><0> ;bt_host_wake_invert = 0 power_start = 3 pmu_temp_enable = 0

在 Linux 内核源码中，make menuconfig 是一个配置内核选项的命令行工具。其中 SDIO UART/GPS class support 是一项内核配置选项，它允许 Linux 内核支持使用 SDIO 总线连接的 UART 或 GPS 设备。在 Linux 系统中，SDIO 总线是一种高速串行总线，可用于连接存储设备、WiFi、蓝牙等设备。当你在内核配置中选择 SDIO UART/GPS class support 时，内核会编译相应的驱动程序，从而使得 Linux 内核可以支持使用 SDIO 总线连接的 UART 或 GPS 设备。这样，你就可以在 Linux 系统中使用这些设备了。需要注意的是，这个选项只有在你的设备支持 SDIO 总线的情况下才有意义。

阅读全文

make menuconifg中的< > SDIO UART/GPS class support 介 绍

相关推荐

( ap6181_sina33m_sc3817r验证通过_20170710_1608没有外层目录.7z

酒店预订管理系统 SSM毕业设计 附带论文.zip

【超强组合】基于VMD-麻雀搜索优化算法SSA-Transformer-BiLSTM的光伏预测算研究Matlab实现.rar

花鸣B2C电子商务平台 SSM毕业设计 附带论文.zip

【超强组合】基于VMD-哈里斯鹰优化算法HHO-Transformer-BiLSTM的光伏预测算研究Matlab实现.rar

程序用到的数据，包括原始点云和拟合平面组成的点云

基于java+swing+applet实现的家庭理财系统(含源码+数据库+答辩PPT)

【超强组合】基于VMD-多元宇宙优化算法MVO-Transformer-LSTM的光伏预测算研究Matlab实现.rar

【超强组合】基于VMD-白冠鸡优化算法COOT-Transformer-GRU的光伏预测算研究Matlab实现.rar

虚拟机械臂文件part7

数据资产治理平台（中台）原型

springboot中华传统服饰文化传播系统61792（数据库+源码）

GB28181 - 5、C++编写GB28181设备端，完成将USB摄像头视频实时转发至GB28181服务并可播放

【超强组合】基于VMD-人工蜂鸟优化算法AHA-Transformer-BiLSTM的光伏预测算研究Matlab实现.rar

数据可视化驾驶舱，包含地图，页面可以直接运行

【java毕业设计】高校毕业生就业满意度调查统计系统源码（ssm+jsp+mysql+说明文档+LW）.zip

3GPP TS 38.413 V15.0.0协议-中英文翻译对照版本（超详细）

alexnet模型-通过CNN卷积神经网络的动漫角色识别-不含数据集图片-含逐行注释和说明文档.zip

最新推荐

PartE1_SDIO_Simplified_Specification_Ver3.00.pdf

SD4.0协议中文翻译版本

SPI、I2C、I2S、UART、CAN、SDIO、GPIO的介绍

SDIOWIFI调试记录

酒店预订管理系统 SSM毕业设计 附带论文.zip

探索数据转换实验平台在设备装置中的应用

管理建模和仿真的文件

ggflags包的国际化问题：多语言标签处理与显示的权威指南

如何使用MATLAB实现电力系统潮流计算中的节点导纳矩阵构建和阻抗矩阵转换，并解释这两种矩阵在潮流计算中的作用和差异？

使用git-log-to-tikz.py将Git日志转换为TIKZ图形

make menuconifg中的< > SDIO UART/GPS class support 介绍

酒店预订管理系统 SSM毕业设计附带论文.zip

花鸣B2C电子商务平台 SSM毕业设计附带论文.zip

酒店预订管理系统 SSM毕业设计附带论文.zip