F28335按键控制led灯亮灭
时间: 2023-08-16 11:06:43 浏览: 79
可以通过以下步骤实现:
1. 首先需要连接一个按键和一个LED灯到STM32F103开发板上。
2. 在代码中定义按键和LED灯的引脚号码。
3. 初始化GPIO口,将按键引脚设置为输入模式,将LED灯引脚设置为输出模式。
4. 在主循环中,不断读取按键状态,如果按键被按下,则将LED灯亮起,否则将LED灯熄灭。
5. 可以使用延时函数来控制LED灯的亮灭时间。
以下是示例代码:
```c
#include "stm32f10x.h"
#define LED_PIN GPIO_Pin_13
#define LED_PORT GPIOC
#define KEY_PIN GPIO_Pin_
#define KEY_PORT GPIOA
void GPIO_Configuration(void)
{
GPIO_InitTypeDef GPIO_InitStructure;
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA | RCC_APB2Periph_GPIOC, ENABLE);
GPIO_InitStructure.GPIO_Pin = LED_PIN;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_Init(LED_PORT, &GPIO_InitStructure);
GPIO_InitStructure.GPIO_Pin = KEY_PIN;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
GPIO_Init(KEY_PORT, &GPIO_InitStructure);
}
int main(void)
{
GPIO_Configuration();
while (1)
{
if (GPIO_ReadInputDataBit(KEY_PORT, KEY_PIN) == RESET)
{
GPIO_SetBits(LED_PORT, LED_PIN);
}
else
{
GPIO_ResetBits(LED_PORT, LED_PIN);
}
// 延时一段时间
for (int i = ; i < 100000; i++);
}
}
```