我正在使用stm32f103rct6,我想要通过printf输入内容到tft屏上,我需要做哪些工作呢,给我提供一个例程,并且代码要有详细的备注,使用库函数进行编写
时间: 2024-05-02 17:23:11 浏览: 16
首先,你需要连接STM32F103RCT6和TFT屏幕。一般来说,TFT屏幕会有相应的引脚说明,你需要按照说明将TFT屏幕连接到STM32F103RCT6的相应引脚上。
接下来,你需要使用库函数来控制TFT屏幕显示。一般来说,液晶显示屏的显示控制需要使用SPI总线进行控制,因此你需要使用STM32的SPI库函数来控制TFT屏幕。
以下是一个简单的例程,可以将printf输出的内容显示在TFT屏幕上:
```c
#include "stm32f10x.h"
#include "stm32f10x_spi.h"
#include "stm32f10x_gpio.h"
#include "stm32f10x_rcc.h"
#include <stdio.h>
#define SPIx SPI1
#define SPIx_CLK RCC_APB2Periph_SPI1
#define SPIx_GPIO GPIOA
#define SPIx_GPIO_CLK RCC_APB2Periph_GPIOA
#define SPIx_PIN_SCK GPIO_Pin_5
#define SPIx_PIN_MISO GPIO_Pin_6
#define SPIx_PIN_MOSI GPIO_Pin_7
#define SPIx_CS_PIN GPIO_Pin_4
void TFT_SPI_Init(void)
{
SPI_InitTypeDef SPI_InitStructure;
GPIO_InitTypeDef GPIO_InitStructure;
RCC_APB2PeriphClockCmd(SPIx_GPIO_CLK | SPIx_CLK, ENABLE);
GPIO_InitStructure.GPIO_Pin = SPIx_PIN_SCK | SPIx_PIN_MOSI;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
GPIO_Init(SPIx_GPIO, &GPIO_InitStructure);
GPIO_InitStructure.GPIO_Pin = SPIx_PIN_MISO;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
GPIO_Init(SPIx_GPIO, &GPIO_InitStructure);
GPIO_InitStructure.GPIO_Pin = SPIx_CS_PIN;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_Init(SPIx_GPIO, &GPIO_InitStructure);
SPI_I2S_DeInit(SPIx);
SPI_StructInit(&SPI_InitStructure);
SPI_InitStructure.SPI_Direction = SPI_Direction_2Lines_FullDuplex;
SPI_InitStructure.SPI_Mode = SPI_Mode_Master;
SPI_InitStructure.SPI_DataSize = SPI_DataSize_8b;
SPI_InitStructure.SPI_CPOL = SPI_CPOL_Low;
SPI_InitStructure.SPI_CPHA = SPI_CPHA_1Edge;
SPI_InitStructure.SPI_NSS = SPI_NSS_Soft;
SPI_InitStructure.SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_4;
SPI_InitStructure.SPI_FirstBit = SPI_FirstBit_MSB;
SPI_InitStructure.SPI_CRCPolynomial = 7;
SPI_Init(SPIx, &SPI_InitStructure);
SPI_Cmd(SPIx, ENABLE);
}
void TFT_WriteCommand(uint8_t cmd)
{
GPIO_ResetBits(SPIx_GPIO, SPIx_CS_PIN);
while (SPI_I2S_GetFlagStatus(SPIx, SPI_I2S_FLAG_TXE) == RESET);
SPI_I2S_SendData(SPIx, cmd);
while (SPI_I2S_GetFlagStatus(SPIx, SPI_I2S_FLAG_RXNE) == RESET);
SPI_I2S_ReceiveData(SPIx);
GPIO_SetBits(SPIx_GPIO, SPIx_CS_PIN);
}
void TFT_WriteData(uint8_t data)
{
GPIO_SetBits(SPIx_GPIO, SPIx_CS_PIN);
while (SPI_I2S_GetFlagStatus(SPIx, SPI_I2S_FLAG_TXE) == RESET);
SPI_I2S_SendData(SPIx, data);
while (SPI_I2S_GetFlagStatus(SPIx, SPI_I2S_FLAG_RXNE) == RESET);
SPI_I2S_ReceiveData(SPIx);
GPIO_ResetBits(SPIx_GPIO, SPIx_CS_PIN);
}
void TFT_Init(void)
{
TFT_SPI_Init();
TFT_WriteCommand(0x01);
delay_ms(100);
TFT_WriteCommand(0x11);
delay_ms(100);
TFT_WriteCommand(0x3A);
TFT_WriteData(0x05);
TFT_WriteCommand(0x29);
TFT_WriteCommand(0x2C);
}
void TFT_DrawChar(uint16_t x, uint16_t y, uint8_t ch, uint16_t color, uint16_t bgcolor)
{
uint8_t i;
uint8_t j;
uint8_t buffer[16];
uint16_t mask;
uint16_t c;
for (i = 0; i < 16; i++)
{
buffer[i] = Font16x24[(ch - 32) * 24 + i * 2];
buffer[i] <<= 8;
buffer[i] |= Font16x24[(ch - 32) * 24 + i * 2 + 1];
}
mask = 0x8000;
for (i = 0; i < 24; i++)
{
for (j = 0; j < 16; j++)
{
c = buffer[j] & mask ? color : bgcolor;
TFT_WriteData(c >> 8);
TFT_WriteData(c & 0xff);
}
mask >>= 1;
}
}
void TFT_DrawString(uint16_t x, uint16_t y, char* str, uint16_t color, uint16_t bgcolor)
{
while (*str)
{
TFT_DrawChar(x, y, *str++, color, bgcolor);
x += 16;
}
}
int main(void)
{
TFT_Init();
TFT_DrawString(0, 0, "Hello, World!", 0xffff, 0x0000);
printf("Hello, World!\n");
while(1);
}
```
这个例程使用了一个16x24的字体库,可以在TFT屏幕上显示字符。在主函数中,我们使用了printf函数来输出一个字符串,并且使用TFT_DrawString函数将这个字符串显示在TFT屏幕上。
需要注意的是,TFT屏幕的控制需要使用SPI总线进行控制,因此在这个例程中,我们需要使用STM32的SPI库函数来进行SPI通信。同时,我们也需要使用GPIO库函数来控制TFT屏幕的CS引脚。除此之外,我们还需要一些延时函数来保证TFT屏幕能够正确地显示。
相关推荐
![rar](https://img-home.csdnimg.cn/images/20210720083606.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)