用c语言写一段触摸屏的代码
时间: 2024-03-16 11:44:24 浏览: 16
下面是一个简单的触摸屏代码示例,使用了c语言和stm32开发板:
```
#include "stm32f4xx.h"
void TouchScreen_Init(void)
{
GPIO_InitTypeDef GPIO_InitStructure;
// 启用GPIOC时钟
RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOC, ENABLE);
// 配置PC0和PC1为输入模式
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0 | GPIO_Pin_1;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN;
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_UP;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_100MHz;
GPIO_Init(GPIOC, &GPIO_InitStructure);
}
void TouchScreen_Read(uint16_t *x, uint16_t *y)
{
// 读取X坐标
GPIO_ResetBits(GPIOC, GPIO_Pin_0); // 拉低X+引脚
GPIO_SetBits(GPIOC, GPIO_Pin_1); // 拉高Y-引脚
*x = ADC_Read();
// 读取Y坐标
GPIO_ResetBits(GPIOC, GPIO_Pin_1); // 拉低Y-引脚
GPIO_SetBits(GPIOC, GPIO_Pin_0); // 拉高X+引脚
*y = ADC_Read();
}
uint16_t ADC_Read(void)
{
ADC_InitTypeDef ADC_InitStructure;
GPIO_InitTypeDef GPIO_InitStructure;
// 启用GPIOA和ADC3时钟
RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOA, ENABLE);
RCC_APB2PeriphClockCmd(RCC_APB2Periph_ADC3, ENABLE);
// 配置PA3和PA6为模拟输入模式
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_3 | GPIO_Pin_6;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AN;
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
GPIO_Init(GPIOA, &GPIO_InitStructure);
// 配置ADC3
ADC_InitStructure.ADC_Resolution = ADC_Resolution_12b;
ADC_InitStructure.ADC_ScanConvMode = DISABLE;
ADC_InitStructure.ADC_ContinuousConvMode = DISABLE;
ADC_InitStructure.ADC_ExternalTrigConvEdge = ADC_ExternalTrigConvEdge_None;
ADC_InitStructure.ADC_DataAlign = ADC_DataAlign_Right;
ADC_InitStructure.ADC_NbrOfConversion = 1;
ADC_Init(ADC3, &ADC_InitStructure);
// 启用ADC3
ADC_Cmd(ADC3, ENABLE);
// 等待ADC稳定
Delay(10);
// 开始转换
ADC_SoftwareStartConv(ADC3);
// 等待转换完成
while (!ADC_GetFlagStatus(ADC3, ADC_FLAG_EOC));
// 读取转换值
return ADC_GetConversionValue(ADC3);
}
void Delay(__IO uint32_t nCount)
{
while(nCount--)
{
}
}
```
此代码使用GPIOC的PC0和PC1引脚连接触摸屏的X+和Y-引脚,并且使用GPIOA的PA3和PA6引脚连接触摸屏的X-和Y+引脚。在TouchScreen_Init函数中,配置GPIOC引脚为输入模式,以及在TouchScreen_Read函数中,根据触摸屏的电阻值读取X和Y坐标。ADC_Read函数用于读取ADC转换值,其中ADC3连接到PA3和PA6引脚,以便读取X和Y坐标的电阻值。最后,Delay函数用于延时。