用c语言一维数组写出一个不用strcpy表达的复制的代码
时间: 2023-05-21 09:07:06 浏览: 70
可以使用循环将一个数组的元素复制到另一个数组中:
```c
void arrayCopy(int* dest, const int* src, int len) {
for (int i = 0; i < len; i++) {
dest[i] = src[i];
}
}
```
当然,这个函数并不完整,您可能需要自行添加一些错误检查。
相关问题
用c语言写出将一组字符串倒序放到另一组字符串
以下是一个简单的 C 代码示例,可以将一个字符串数组中的每个字符串倒序放置到另一个字符串数组中。
```c
#include <stdio.h>
#include <string.h>
#define MAX_LENGTH 100 // 定义最大字符串长度
void reverse(char *str) {
int len = strlen(str);
for (int i = 0; i < len / 2; i++) {
char tmp = str[i];
str[i] = str[len - i - 1];
str[len - i - 1] = tmp;
}
}
int main() {
char strArr1[10][MAX_LENGTH]; // 定义一个二维字符数组,用于存储字符串
char strArr2[10][MAX_LENGTH]; // 定义另一个二维字符数组,用于存储翻转后的字符串
int n; // 定义字符串数组的大小
printf("请输入字符串数组的大小: ");
scanf("%d", &n);
// 输入字符串
printf("请输入%d个字符串:\n", n);
for (int i = 0; i < n; i++) {
scanf("%s", strArr1[i]);
}
// 将字符串翻转并存储到另一个数组中
for (int i = 0; i < n; i++) {
reverse(strArr1[i]);
strcpy(strArr2[i], strArr1[i]);
}
// 输出结果
printf("\n字符串翻转后的结果是:\n");
for (int i = 0; i < n; i++) {
printf("%s\n", strArr2[i]);
}
return 0;
}
```
在上面的代码中,我们首先定义了两个二维字符数组 `strArr1` 和 `strArr2`,分别用于存储原始字符串和翻转后的字符串。然后,我们从用户那里输入字符串数组的大小和字符串,对每个字符串进行翻转,并将其存储到另一个数组中。最后,我们输出翻转后的字符串数组。
值得注意的是,这里我们定义了 `reverse` 函数来翻转每个字符串。该函数遍历字符串的前一半,并将其与相应的后一半交换,从而实现字符串的翻转。
写一个C语言串口接收数据存入二维数组 带输入输出函数 数据先入先出 数组宽度32字节 长度10列 存入时更新为数据序列的最后一个并返回当前共多少个序列 输入时取出第一个序列并返回还剩多少个序列 并详细解释代码
好的,我来为您编写一个符合要求的C语言程序。
首先,我们需要定义一个二维数组,宽度为32字节,长度为10列,用来存储接收到的数据序列。代码如下:
```c
#define WIDTH 32
#define LENGTH 10
char data[LENGTH][WIDTH];
int count = 0;
int front = 0;
int rear = 0;
```
其中,count表示当前共有多少个序列;front表示队列的头部;rear表示队列的尾部。
接下来,我们需要编写串口接收数据并存入数组的函数,代码如下:
```c
void receive_data(char c) {
static int index = 0;
if (c != '\n') { // 如果不是换行符,说明还没接收完一整个序列
data[rear][index++] = c; // 存储数据
} else { // 如果是换行符,说明接收到了完整的一整个序列
data[rear][index] = '\0'; // 加上字符串结束符
rear = (rear + 1) % LENGTH; // 更新队尾
if (count < LENGTH) { // 如果队列未满
count++; // 更新序列数
} else { // 如果队列已满
front = (front + 1) % LENGTH; // 更新队头
}
index = 0; // 重置索引
}
}
```
该函数的作用是接收一个字符c,如果不是换行符,则表示还没接收完一个完整的序列,将其存储到数组中;如果是换行符,则表示接收到了一个完整的序列,将其加上字符串结束符,并更新队尾和序列数。如果队列已满,则需要更新队头。
最后,我们需要编写一个函数来取出第一个序列并返回还剩多少个序列,代码如下:
```c
int get_data(char *buf) {
if (count == 0) { // 如果队列为空,返回0
return 0;
} else {
strcpy(buf, data[front]); // 复制第一个序列到buf中
front = (front + 1) % LENGTH; // 更新队头
count--; // 更新序列数
return count; // 返回剩余序列数
}
}
```
该函数的作用是将队列头部的序列复制到buf中,并更新队头和序列数,最后返回剩余序列数。
完整代码如下:
```c
#include <stdio.h>
#include <string.h>
#define WIDTH 32
#define LENGTH 10
char data[LENGTH][WIDTH];
int count = 0;
int front = 0;
int rear = 0;
void receive_data(char c) {
static int index = 0;
if (c != '\n') {
data[rear][index++] = c;
} else {
data[rear][index] = '\0';
rear = (rear + 1) % LENGTH;
if (count < LENGTH) {
count++;
} else {
front = (front + 1) % LENGTH;
}
index = 0;
}
}
int get_data(char *buf) {
if (count == 0) {
return 0;
} else {
strcpy(buf, data[front]);
front = (front + 1) % LENGTH;
count--;
return count;
}
}
int main() {
char input[WIDTH];
while (1) {
scanf("%s", input);
receive_data(input[0]);
printf("Current count: %d\n", count);
while (count > 0) {
get_data(input);
printf("Remaining count: %d, dequeued data: %s\n", count, input);
}
}
return 0;
}
```
在该程序中,我们使用了一个无限循环来模拟串口接收数据的过程,每次接收到一个字符后,调用receive_data函数将其存储到数组中,并打印当前序列数。然后使用一个while循环来取出所有的序列,并打印剩余序列数和取出的序列。