clc;clear;close all %% load matlab.mat Fs = 1000; fs = 1000; for i = 1:12 x = signal(:,i); t = (0:length(x)-1)/fs; %% 小波变换提取基线 w='sym8'; thr_met='s'; Fc = 2; % 设置的截止频率 lev = ceil(log2(Fs/Fc)); BL = wden(x,'heursure',thr_met,'one',lev, w); x1 = x-BL; X1(:,i) = x1; %% 利用butterworth滤波器去除工频干扰 Fpass1 = 45; % First Passband Frequency Fstop1 = 48; % First Stopband Frequency Fstop2 = 52; % Second Stopband Frequency Fpass2 = 55; % Second Passband Frequency Apass1 = 0.1; % First Passband Ripple (dB) Astop = 30; % Stopband Attenuation (dB) Apass2 = 0.1; % Second Passband Ripple (dB) match = 'stopband'; % Band to match exactly % Construct an FDESIGN object and call its BUTTER method. h = fdesign.bandstop(Fpass1, Fstop1, Fstop2, Fpass2, Apass1, Astop, ... Apass2, Fs); Hd = design(h, 'butter', 'MatchExactly', match); % butterworth滤波器 x2 = filter(Hd,x1); X2(:,i) = x2; %% 利用chebyII滤波器去除肌电 Fs = 1000; % Sampling Frequency Fpass = 5; % Passband Frequency Fstop = 10; % Stopband Frequency Apass = 1; % Passband Ripple (dB) Astop = 80; % Stopband Attenuation (dB) match = 'stopband'; % Band to match exactly % Construct an FDESIGN object and call its CHEBY2 method. h = fdesign.lowpass(Fpass, Fstop, Apass, Astop, Fs); Hd = design(h, 'cheby2', 'MatchExactly', match); x3 = filter(Hd,x2); xc = x2-x3; X3(:,i) = xc; end figure; for i = 1:12 subplot(12,1,i); plot(t,signal(:,i)); end figure; for i = 1:12 subplot(12,1,i); plot(t,X1(:,i)); end
时间: 2024-04-28 13:26:27 浏览: 19
这段代码主要是对12导联心电图数据进行预处理,包括去除基线漂移、去除工频干扰和肌电干扰等。具体实现过程如下:
1. 读取原始心电信号数据 signal,并设置采样率 fs。
2. 对每个导联的信号进行小波变换,提取基线漂移,并将其从原信号中减去。
3. 利用 butterworth 滤波器去除工频干扰,设置带阻滤波器的截止频率和带宽等参数。
4. 利用 chebyII 滤波器去除肌电干扰,设置低通滤波器的通带和阻带参数。
5. 将去除基线漂移、工频干扰和肌电干扰之后的信号分别保存在 X1、X2 和 X3 中。
6. 绘制原始心电信号和处理后的信号在所有导联上的图像,便于观察和比较。
需要注意的是,在代码中使用了一些变量和函数,如小波变换的参数、滤波器设计的参数等,需要根据具体情况进行设置。
相关问题
clear clc close all; load fisheriris.mat X=meas(:,3:4); y=categorical(species); classifier=fitcsvm(X,y,'KernelFunction','linear')
这是一个使用线性核的支持向量机分类器的示例代码,用于对鸢尾花数据集的前两个特征进行分类。categorical() 函数将鸢尾花的种类转换为分类数据类型。fitcsvm() 函数用于训练支持向量机分类器。请注意,在这个示例中,我们只使用了部分数据来训练分类器,因为我们只使用了第三个和第四个特征来训练分类器。如果您需要使用所有特征,您可以将X设置为meas,即X=meas。
clc,clear,close all; load data_all.mat load dist_A.mat
Sorry, as an AI language model, I do not have access to external files or data. Can you please provide more information about the purpose of this code and what the data files contain?