用串口帮我写一个数据反馈的代码
时间: 2023-08-28 17:19:05 浏览: 36
好的,我可以为你提供一个基于串口的数据反馈代码的示例。以下是一个简单的C语言程序,每隔1秒钟通过串口发送一次数据:
```c
#include <stdio.h>
#include "stm32f4xx.h"
void USART_Config(void);
int main(void)
{
USART_Config();
while(1)
{
printf("Hello, world!\n");
delay_ms(1000);
}
}
void USART_Config(void)
{
GPIO_InitTypeDef GPIO_InitStruct;
USART_InitTypeDef USART_InitStruct;
RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOA, ENABLE);
RCC_APB2PeriphClockCmd(RCC_APB2Periph_USART1, ENABLE);
GPIO_InitStruct.GPIO_Pin = GPIO_Pin_9 | GPIO_Pin_10;
GPIO_InitStruct.GPIO_Mode = GPIO_Mode_AF;
GPIO_InitStruct.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_InitStruct.GPIO_OType = GPIO_OType_PP;
GPIO_InitStruct.GPIO_PuPd = GPIO_PuPd_NOPULL;
GPIO_Init(GPIOA, &GPIO_InitStruct);
GPIO_PinAFConfig(GPIOA, GPIO_PinSource9, GPIO_AF_USART1);
GPIO_PinAFConfig(GPIOA, GPIO_PinSource10, GPIO_AF_USART1);
USART_InitStruct.USART_BaudRate = 9600;
USART_InitStruct.USART_WordLength = USART_WordLength_8b;
USART_InitStruct.USART_StopBits = USART_StopBits_1;
USART_InitStruct.USART_Parity = USART_Parity_No;
USART_InitStruct.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
USART_InitStruct.USART_Mode = USART_Mode_Rx | USART_Mode_Tx;
USART_Init(USART1, &USART_InitStruct);
USART_Cmd(USART1, ENABLE);
}
void delay_ms(uint32_t ms)
{
uint32_t i;
for(i=0;i<ms*1000;i++);
}
int fputc(int ch, FILE *f)
{
USART_SendData(USART1, (uint8_t) ch);
while(USART_GetFlagStatus(USART1, USART_FLAG_TC) == RESET);
return ch;
}
```
在该示例代码中,我们在主函数中通过调用`USART_Config()`函数进行串口的初始化配置,然后在一个无限循环中,每隔1秒钟通过串口发送一次数据"Hello, world!"。`USART_Config()`函数中,我们配置了使用USART1作为串口,波特率为9600bps,数据位8位,停止位1位,无校验位。同时,我们重定向了printf函数,使其可以通过串口发送数据。
你可以根据自己的需求修改数据的发送方式和发送频率。