stm32串口接收数据
时间: 2023-09-04 22:16:45 浏览: 37
在 STM32 中,串口接收数据需要以下步骤:
1. 配置串口的 GPIO 引脚和 USART 模块。
2. 配置 USART 的通信参数,例如波特率、数据位、停止位、校验位等。
3. 启动 USART 接收中断,并设置中断优先级。
4. 在中断处理函数中,读取 USART 的数据寄存器,将数据保存到缓冲区中。
下面是一个简单的示例代码:
```c
#include "stm32f10x.h"
#define BUFFER_SIZE 128
uint8_t buffer[BUFFER_SIZE];
uint8_t index = 0;
void USART1_IRQHandler(void)
{
if (USART_GetITStatus(USART1, USART_IT_RXNE) != RESET)
{
buffer[index++] = USART_ReceiveData(USART1);
if (index >= BUFFER_SIZE)
{
index = 0;
}
}
}
int main(void)
{
USART_InitTypeDef USART_InitStructure;
NVIC_InitTypeDef NVIC_InitStructure;
GPIO_InitTypeDef GPIO_InitStructure;
// 使能 USART1 和 GPIOA 的时钟
RCC_APB2PeriphClockCmd(RCC_APB2Periph_USART1 | RCC_APB2Periph_GPIOA, ENABLE);
// 配置 USART1 的 GPIO 引脚
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_Init(GPIOA, &GPIO_InitStructure);
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
GPIO_Init(GPIOA, &GPIO_InitStructure);
// 配置 USART1 的通信参数
USART_InitStructure.USART_BaudRate = 9600;
USART_InitStructure.USART_WordLength = USART_WordLength_8b;
USART_InitStructure.USART_StopBits = USART_StopBits_1;
USART_InitStructure.USART_Parity = USART_Parity_No;
USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx;
USART_Init(USART1, &USART_InitStructure);
// 配置 USART1 的中断
NVIC_InitStructure.NVIC_IRQChannel = USART1_IRQn;
NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0;
NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;
NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
NVIC_Init(&NVIC_InitStructure);
// 启动 USART1 接收中断
USART_ITConfig(USART1, USART_IT_RXNE, ENABLE);
// 启动 USART1
USART_Cmd(USART1, ENABLE);
while (1)
{
// 主程序代码
}
}
```
在上面的代码中,首先配置了 USART1 的 GPIO 引脚和通信参数。然后启动了 USART1 接收中断,并在中断处理函数中将接收到的数据保存到缓冲区中。
在主程序中,可以使用缓冲区中的数据进行后续的处理。需要注意的是,缓冲区的大小应该足够大,以防止接收数据溢出。同时,需要在主程序中定时清空缓冲区,以避免数据重复接收。
相关推荐
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)