static void tcp_set_rto(struct sock *sk) 什么意思
时间: 2024-05-30 21:11:30 浏览: 14
这段代码应该是 Linux 内核网络协议栈中 TCP 协议的一部分。它的作用是设置 TCP 传输控制块(TCB)中的重传超时时间(RTO)。
TCP 是一种可靠的传输协议,它通过不断重传丢失的数据包来保证数据的可靠性。而 RTO 就是指 TCP 在发现一个数据包丢失之后,等待多长时间再进行重传。TCP 的 RTO 算法是根据之前的网络状况来计算出来的,并且随着网络状况的变化而动态调整。
而在这段代码中,tcp_set_rto 函数就是根据当前的网络状况来重新计算 RTO,并将其设置到 TCP 的 TCB 中。这样,在后续的数据传输中,TCP 就可以根据这个 RTO 值来进行数据包的重传,从而保证数据的可靠性。
相关问题
UART_INTS_RTO
UART_INTS_RTO是一个与串口通信相关的中断志位,它表示串口接收超时中断。当串口接收数据时,如果在一定时间内没有接收到完整的数据帧,就会触发接收超时中断。
UART_INTS_RTO是UART控制器中的一个寄存器位,用于标识接收超时中断的发生。当接收超时中断被触发时,系统可以通过检查该标志位来进行相应的处理,例如重新启动接收操作或者进行错误处理。
lwip中的udp_pcb是什么
在lwIP中,udp_pcb代表UDP协议控制块。它是用于管理UDP协议的数据结构,其中包含了UDP协议的各种参数、状态和回调函数等信息。udp_pcb结构体定义在lwip/udp.h头文件中,它的定义如下:
```c
struct udp_pcb {
/* 下一个udp_pcb结构体 */
struct udp_pcb *next;
/* 本地IP地址 */
ip_addr_t local_ip;
/* 本地端口号 */
u16_t local_port;
/* 回调函数 */
udp_recv_fn recv;
/* 用户数据指针 */
void *recv_arg;
/* 远程IP地址 */
ip_addr_t remote_ip;
/* 远程端口号 */
u16_t remote_port;
/* 发送队列 */
struct pbuf *p;
/* 发送IP地址 */
ip_addr_t *local_ip_ptr;
/* 发送端口 */
u16_t local_port_tmp;
/* 发送回调函数 */
udp_send_fn send;
/* 发送用户数据指针 */
void *send_arg;
/* 接收的数据包数量 */
u16_t recv_cnt;
/* 发送的数据包数量 */
u16_t sent_cnt;
/* 错误计数器 */
u8_t err_cnt;
/* 记录最后一次错误的时间 */
u32_t last_err;
/* 记录最后一次接收到数据包的时间 */
u32_t rcv_tmr;
/* 记录最后一次发送数据包的时间 */
u32_t last_send;
/* 记录最后一次接收到ACK的时间 */
u32_t last_ack;
/* 记录最后一次重传数据包的时间 */
u32_t tmr;
/* 重传计时器 */
u16_t rto;
/* 延迟ACK计时器 */
u16_t ack_delay;
/* 最大重传次数 */
u8_t max_cnt;
/* 状态 */
u8_t state;
/* 用于连接时的握手数据 */
struct udp_pcb *next_in_seq;
/* 用于连接时的握手数据 */
u32_t rcv_nxt;
/* 用于连接时的握手数据 */
u32_t rcv_wnd;
/* 用于连接时的握手数据 */
u32_t snd_nxt;
/* 用于连接时的握手数据 */
u32_t snd_wnd;
/* 用于连接时的握手数据 */
u32_t snd_wl1;
/* 用于连接时的握手数据 */
u32_t snd_wl2;
/* 用于连接时的握手数据 */
u32_t lastack;
/* 用于连接时的握手数据 */
u32_t cwnd;
/* 用于连接时的握手数据 */
u32_t ssthresh;
/* 用于连接时的握手数据 */
u16_t mss;
/* 用于连接时的握手数据 */
u16_t remote_mss;
/* 用于连接时的握手数据 */
u16_t sv;
/* 用于连接时的握手数据 */
u16_t rsv;
/* 用于连接时的握手数据 */
u16_t rsv2;
/* 用于连接时的握手数据 */
struct tcp_pcb *tcp;
};
```
udp_pcb结构体中的各个成员变量用于保存UDP协议的相关信息,其中最重要的是recv回调函数和send回调函数,它们分别用于接收和发送UDP数据包。当接收到UDP数据包时,lwIP会调用udp_pcb中的recv回调函数来处理数据包,而当发送UDP数据包时,lwIP会调用udp_pcb中的send回调函数将数据包发送出去。
相关推荐
![pdf](https://img-home.csdnimg.cn/images/20210720083512.png)
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)