GPIO_InitStructure该函数是什么提供
时间: 2023-06-20 17:09:31 浏览: 48
GPIO_InitStructure 是一个结构体变量,用于初始化 STM32 微控制器的 GPIO 端口的配置。它包含了多个成员变量,如 GPIO_Pin、GPIO_Mode、GPIO_Speed、GPIO_OType、GPIO_PuPd 等。通过对这些成员变量的设置,可以实现对 GPIO 端口的不同功能模式、输出速度、输出类型、上下拉电阻等的配置。GPIO_InitStructure 的具体实现可能因芯片型号和厂家而异。
相关问题
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB, ENABLE); GPIO_InitTypeDef GPIO_InitStructure; GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_OD; GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; GPIO_InitStructure.GPIO_Pin = GPIO_Pin_8; GPIO_Init(GPIOB, &GPIO_InitStructure); GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9; GPIO_Init(GPIOB, &GPIO_InitStructure);的hal库写法
以下是使用HAL库的代码示例,用于初始化GPIOB的引脚8和引脚9为开漏输出模式,并设置引脚速度为50MHz:
```c
/* 使能GPIOB的时钟 */
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB, ENABLE);
/* 定义GPIO初始化结构体 */
GPIO_InitTypeDef GPIO_InitStructure;
/* 配置引脚8 */
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_8;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_OUT;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_InitStructure.GPIO_OType = GPIO_OType_OD;
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
HAL_GPIO_Init(GPIOB, &GPIO_InitStructure);
/* 配置引脚9 */
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9;
HAL_GPIO_Init(GPIOB, &GPIO_InitStructure);
```
在上述示例中,首先使用`RCC_APB2PeriphClockCmd`函数使能GPIOB的时钟。然后,定义一个`GPIO_InitTypeDef`结构体`GPIO_InitStructure`来配置GPIO引脚的初始化参数。接下来,设置引脚8和引脚9的初始化参数,并使用`HAL_GPIO_Init`函数初始化这两个引脚。
注意,上述代码假设你已经包含了相关的头文件,并且已经正确配置了系统时钟。
将这一段配置改写成HAL库语句 GPIO_InitTypeDef GPIO_InitStructure ; RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOD|RCC_AHB1Periph_GPIOE, ENABLE); GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0| GPIO_Pin_1| GPIO_Pin_2| GPIO_Pin_3| GPIO_Pin_4| GPIO_Pin_5| GPIO_Pin_6| GPIO_Pin_7| GPIO_Pin_8| GPIO_Pin_9| GPIO_Pin_10| GPIO_Pin_11| GPIO_Pin_12; GPIO_InitStructure.GPIO_Speed = GPIO_Speed_100MHz; GPIO_InitStructure.GPIO_Mode =GPIO_Mode_IN; GPIO_InitStructure.GPIO_OType = GPIO_OType_PP; GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_UP; GPIO_Init(GPIOD ,&GPIO_InitStructure); GPIO_InitStructure.GPIO_Pin = GPIO_Pin_7; GPIO_InitStructure.GPIO_Speed = GPIO_Speed_100MHz; GPIO_InitStructure.GPIO_Mode =GPIO_Mode_OUT; GPIO_InitStructure.GPIO_OType = GPIO_OType_PP; GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_UP; GPIO_Init(GPIOE ,&GPIO_InitStructure);
使用 HAL 库来配置上述代码,你可以将其改写为以下形式:
```c
GPIO_InitTypeDef GPIO_InitStructure;
/* 使能 GPIOD 和 GPIOE 的时钟 */
__HAL_RCC_GPIOD_CLK_ENABLE();
__HAL_RCC_GPIOE_CLK_ENABLE();
/* 配置 GPIOD */
GPIO_InitStructure.Pin = GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_2 | GPIO_PIN_3 | GPIO_PIN_4 | GPIO_PIN_5 | GPIO_PIN_6 |
GPIO_PIN_7 | GPIO_PIN_8 | GPIO_PIN_9 | GPIO_PIN_10 | GPIO_PIN_11 | GPIO_PIN_12;
GPIO_InitStructure.Mode = GPIO_MODE_INPUT;
GPIO_InitStructure.Pull = GPIO_PULLUP;
HAL_GPIO_Init(GPIOD, &GPIO_InitStructure);
/* 配置 GPIOE */
GPIO_InitStructure.Pin = GPIO_PIN_7;
GPIO_InitStructure.Mode = GPIO_MODE_OUTPUT_PP;
GPIO_InitStructure.Speed = GPIO_SPEED_FREQ_HIGH;
HAL_GPIO_Init(GPIOE, &GPIO_InitStructure);
```
在这个例子中,我们首先使用 `__HAL_RCC_GPIOx_CLK_ENABLE()` 函数使能 GPIOD 和 GPIOE 的时钟。然后,我们定义了一个名为 `GPIO_InitStructure` 的结构体变量,用于配置 GPIOD 和 GPIOE 的引脚。我们分别对 GPIOD 和 GPIOE 的引脚、模式、上拉/下拉和速度进行赋值。最后,通过调用 `HAL_GPIO_Init()` 函数来进行引脚的初始化,传入相应的 GPIO 口和结构体变量的指针作为参数。