单片机如何接收串口屏模块按下录入指纹按键下发的数据包并解包?通过代码解释
时间: 2024-03-10 17:49:14 浏览: 24
首先,单片机需要连接串口屏模块,一般使用串口通信,需要设置波特率、数据位、停止位等参数,这些参数需要与串口屏模块相匹配。
接收串口屏模块按下录入指纹按键下发的数据包,需要使用单片机的串口接收中断函数,当串口接收到数据时,中断函数会被触发,然后可以在中断函数中读取接收到的数据并进行解包。
解包的过程需要根据数据包的格式进行,一般来说,数据包包含帧头、数据长度、数据内容和校验位等部分,需要先读取帧头和数据长度,然后根据数据长度读取数据内容并进行校验,最后得到有效的数据。
以下是一个示例代码:
```c
#include <stdio.h>
#include <string.h>
#include <stdlib.h>
#define BUF_SIZE 256
unsigned char buf[BUF_SIZE];
int buf_pos = 0;
void USART_IRQHandler(void)
{
if (USART_GetITStatus(USART1, USART_IT_RXNE) != RESET) {
buf[buf_pos++] = USART_ReceiveData(USART1);
if (buf_pos >= 2 && buf_pos == buf[1] + 4) {
// received a complete packet
if (buf[0] == 0xAA && buf[buf_pos-1] == 0x55) {
// packet is valid, do something with the data
int data_len = buf[1];
unsigned char *data = &buf[2];
// handle the data here
}
buf_pos = 0;
}
}
}
int main(void)
{
// initialize USART1 with the correct baud rate, data bits, stop bits, etc.
USART_InitTypeDef USART_InitStructure;
USART_InitStructure.USART_BaudRate = 9600;
USART_InitStructure.USART_WordLength = USART_WordLength_8b;
USART_InitStructure.USART_StopBits = USART_StopBits_1;
USART_InitStructure.USART_Parity = USART_Parity_No;
USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx;
USART_Init(USART1, &USART_InitStructure);
USART_ITConfig(USART1, USART_IT_RXNE, ENABLE);
NVIC_EnableIRQ(USART1_IRQn);
USART_Cmd(USART1, ENABLE);
while (1) {
// main loop
}
}
```
在上面的代码中,接收到数据后会触发串口中断函数 `USART_IRQHandler()`,然后判断是否接收到了完整的数据包,如果是,则进行解包并处理数据。需要根据具体的硬件和通信协议进行修改。
相关推荐
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![pdf](https://img-home.csdnimg.cn/images/20210720083512.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)