channel slope
时间: 2023-10-10 16:09:11 浏览: 39
Channel slope refers to the amount of steepness or gradient of a channel or waterway. It is usually measured in terms of the ratio of the change in elevation of the water surface to the horizontal distance over which the change occurs. A steeper channel slope can increase the velocity of the water and the potential for erosion, while a flatter slope can decrease the velocity and increase the potential for sediment deposition. The channel slope is an important factor in understanding the behavior and characteristics of rivers and streams.
相关问题
if(!ADC_GetFlagStatus(ADC1, ADC_FLAG_EOC)) { return 0; } temp_adc_value = ADC_GetConversionValue(ADC1); // T = (Vsense -V15)/AVG_Slope +25 , //Vsense = (adc_value *3.3)/4096, 12bit ADC // V25 = 0.76,AVG_Slope = 2.5mV/? temperature = ((temp_adc_value * 3.3f)/4096.0f - 0.76f) *10000/2.5f + 250 ; temp_buf[temp_index%TEMP_COLLECT_NUM] = temperature; temp_index++; // 2é?ˉ?à′?oó2??aê????ù?μ???? if(temp_index >= TEMP_COLLECT_NUM) { avg_flag = 1; } ADC_TempSensorVrefintCmd(ENABLE); ADC_RegularChannelConfig(ADC1, ADC_Channel_TempSensor, 1, ADC_SampleTime_15Cycles); ADC_SoftwareStartConv(ADC1); if((avg_flag == 1) && (TEMP_COLLECT_NUM > 2)) { temp_min = temp_buf[0]; // è¥μ?×?′ó?μ?¢×?D??μ ?ó???ù for(int i= 0; i<TEMP_COLLECT_NUM; i++) { temp_sum += temp_buf[i]; if(temp_buf[i] < temp_min) { temp_min = temp_buf[i]; } if(temp_buf[i] > temp_max) { temp_max = temp_buf[i]; } } temp_sum -= temp_max; temp_sum -= temp_min; return (temp_sum / (TEMP_COLLECT_NUM - 2)); } return 0; }
这段代码是用于读取温度传感器的数据,并计算出平均温度。它使用了STM32的ADC模块来读取温度传感器的电压值,然后根据电压值和一些常量计算出温度值。其中,温度传感器的电压值通过ADC_GetConversionValue函数获取,而ADC_GetFlagStatus函数用于检查ADC转换是否完成。此外,该代码还使用了一个循环数组temp_buf来存储多次读取的温度值,以便计算平均值。最后,该函数返回计算出的平均温度值。
void ADS1115_ReadRawData(ADS1115_InitTypeDefine *ADS1115_InitStruct)//ADS1115_RawData { unsigned char Result[2]; uint8_t Writebuff[1]; Writebuff[0] = ADS1115_Pointer_ConverReg; HAL_I2C_Master_Transmit(&hi2c1, ADS1115_InitStruct->ADDRESS, Writebuff, 3, 100); HAL_I2C_Master_Receive(&hi2c1, ADS1115_InitStruct->ADDRESS , Result, 2, 100); ADS1115_InitStruct->ADS1115_RawData[ADS1115_InitStruct->CHANNEL] = (int16_t) (((Result[0] << 8) & 0xFF00) | (Result[1] & 0xFF)); //return Writebuff; // ADS1115_ReadRawData(&ADS1115_InitStruct); // 读取原始数据 }怎么对得到的数据进行处理
要对获取到的数据进行处理,您可以根据您的应用程序需求来进行处理。以下是一些处理数据的示例:
1. 将原始数据转换为电压值
```
float voltage = ADS1115_InitStruct->ADS1115_RawData[ADS1115_InitStruct->CHANNEL] * ADS1115_Voltage_Range / ADS1115_Max_Value;
printf("转换后的电压值为:%f\n", voltage);
```
在上面的示例中,我们将原始数据转换为电压值。我们使用了与ADS1115初始化时使用的相同的电压范围和最大值常量。您可以根据您的应用程序需求更改这些常量。
2. 将原始数据转换为温度值
```
float temperature = (float) ADS1115_InitStruct->ADS1115_RawData[ADS1115_InitStruct->CHANNEL] * ADS1115_Temperature_Slope + ADS1115_Temperature_Offset;
printf("转换后的温度值为:%f\n", temperature);
```
在上面的示例中,我们将原始数据转换为温度值。我们使用了与ADS1115初始化时使用的相同的温度斜率和偏移常量。您可以根据您的应用程序需求更改这些常量。
3. 将原始数据与历史数据进行比较
```
if (ADS1115_InitStruct->ADS1115_RawData[ADS1115_InitStruct->CHANNEL] > ADS1115_InitStruct->ADS1115_HistoryData[ADS1115_InitStruct->CHANNEL])
{
printf("当前数据大于历史数据\n");
}
else if (ADS1115_InitStruct->ADS1115_RawData[ADS1115_InitStruct->CHANNEL] < ADS1115_InitStruct->ADS1115_HistoryData[ADS1115_InitStruct->CHANNEL])
{
printf("当前数据小于历史数据\n");
}
else
{
printf("当前数据与历史数据相同\n");
}
```
在上面的示例中,我们将当前原始数据与历史数据进行比较。我们使用了与ADS1115初始化时使用的相同的历史数据数组。您可以根据您的应用程序需求更改这些常量和比较逻辑。