查询ip地址cmd命令
时间: 2023-11-18 15:13:51 浏览: 31
要查询 IP 地址的 CMD 命令是 "ipconfig"。打开命令提示符窗口,输入 "ipconfig" 命令并按下回车键,会显示出当前计算机的 IP 地址、子网掩码和默认网关等信息。如果要获取外部 IP 地址,可以使用 "nslookup myip.opendns.com resolver1.opendns.com" 命令来查询。
相关问题
查看ip地址的cmd命令
你可以在命令提示符窗口中使用 "ipconfig" 命令来查看你的计算机的IP地址。具体步骤如下:
1. 打开命令提示符窗口。在 Windows 操作系统中,你可以按下 Win + R 键,打开运行窗口,输入 "cmd" 并按下 Enter 键,即可打开命令提示符窗口。
2. 输入 "ipconfig" 命令并按下 Enter 键。该命令会显示你的计算机的所有网络连接信息,包括IP地址、子网掩码、默认网关等。
3. 查找你的IP地址。在命令输出中,查找标有 "IPv4地址" 的行,该行下方的数值即为你的IP地址。
注意:如果你的计算机有多个网络连接,你需要找到你要查询IP地址的网络连接对应的信息。你可以查看 "无线局域网适配器" 或 "以太网适配器" 等行来找到你要查询的网络连接。
cmd修改ip地址网关命令
To change the IP address and gateway using the command prompt on Windows, you can follow these steps:
1. Open the command prompt by pressing the Windows key + R, typing "cmd" and pressing Enter.
2. Type "ipconfig" to view the current IP address and gateway.
3. Type "netsh interface ipv4 show config" to view the network interface configuration.
4. Note the name of the interface you want to configure (e.g. "Ethernet").
5. Type "netsh interface ipv4 set address name=<interface> static <ip_address> <subnet_mask> <default_gateway>" to set the IP address, subnet mask, and default gateway for the interface. Replace <interface> with the name of the interface, <ip_address> with the desired IP address, <subnet_mask> with the subnet mask, and <default_gateway> with the desired default gateway.
For example, if you want to set the IP address to 192.168.0.10, subnet mask to 255.255.255.0, and default gateway to 192.168.0.1 for the "Ethernet" interface, you can run the following command:
```
netsh interface ipv4 set address name=Ethernet static 192.168.0.10 255.255.255.0 192.168.0.1
```
After running this command, you should see a message indicating that the interface has been configured with the new IP address, subnet mask, and default gateway.