CC2530控制1路5v继电器开关基础实验代码
时间: 2024-03-05 08:48:39 浏览: 23
以下是使用CC2530控制1路5V继电器的基础实验代码:
```c
#include "ZComDef.h"
#include "OSAL.h"
#include "ZDApp.h"
#include "ZDObject.h"
#include "AF.h"
#include "APS.h"
#include "ZDProfile.h"
#include "OnBoard.h"
#include "hal_led.h"
#include "hal_key.h"
#include "hal_uart.h"
#include "hal_timer.h"
#define RELAY_ON 0x01
#define RELAY_OFF 0x00
// Endpoint and Profile IDs
#define MY_ENDPOINT 10
#define MY_PROFILE_ID 0x1234
// Function prototypes
void appMsgSend( uint8* );
void processRxData( uint8*, uint8 );
// Global variables
uint8 RelayStatus = RELAY_OFF;
void appMain( uint8 task_id, uint8 type, uint16 logicalClusterID, uint8* pData, uint16 len )
{
if ( type == ZDO_CB_MSG )
{
afIncomingMSGPacket_t* pkt = (afIncomingMSGPacket_t*)pData;
switch ( pkt->clusterId )
{
case 0x01: // Relay on/off command
processRxData( pkt->cmd.Data, pkt->cmd.DataLength );
break;
}
}
else if ( type == APP_MSG )
{
appMsgSend( pData );
}
}
void appMsgSend( uint8* pData )
{
afAddrType_t afAddr;
afAddr.addrMode = (afAddrMode_t)AddrBroadcast;
afAddr.endPoint = MY_ENDPOINT;
afAddr.addr.shortAddr = 0xFFFF;
AF_DataRequest( &afAddr, &myAppEpDesc, MY_PROFILE_ID, 0x01, pData, 1, 0, AF_DEFAULT_RADIUS );
}
void processRxData( uint8* pData, uint8 len )
{
if ( pData[0] == RELAY_ON )
{
RelayStatus = RELAY_ON;
HalLedSet(HAL_LED_1, HAL_LED_MODE_ON); //打开指示灯
HalTimerMilliWait(1000); //延时1秒
RelayStatus = RELAY_OFF;
HalLedSet(HAL_LED_1, HAL_LED_MODE_OFF); //关闭指示灯
}
}
```
在这个示例中,我们定义了一个名为`RelayStatus`的全局变量来跟踪继电器的状态。在`processRxData`函数中,当接收到`RELAY_ON`命令时,我们将`RelayStatus`设置为`RELAY_ON`,打开一个LED指示灯,并延时1秒。之后,我们将`RelayStatus`设置为`RELAY_OFF`,关闭LED指示灯。
注意,在实际应用中,您需要根据您的硬件和网络设置进行适当的修改。同时,如果要开发更复杂的功能,您需要根据需要在代码中添加其他函数和变量。
相关推荐
![c](https://img-home.csdnimg.cn/images/20210720083646.png)
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![rar](https://img-home.csdnimg.cn/images/20210720083606.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)