首页Can you transfer the data from the device configured by IP 10.1.1.1/16 to that configured by 10.1.2.1/16?

Can you transfer the data from the device configured by IP 10.1.1.1/16 to that configured by 10.1.2.1/16?

时间: 2024-05-26 09:16:47 浏览: 102

DMA.rar_The Show_dma_dma flash ram_pending_ram dma

This example provides a description of how to use a DMA channel to transfer a word data buffer from memory (Flash) to memory (RAM). The dedicated DMA channel is configured to transfer once a time a 32 word data buffer stored as constant in the Flash memory to another buffer in the RAM memory. The received data are stored in the DST_Buffer. The DMA channel transfer complete interrupt is enabled to generate an interrupt at the end of the buffer transfer. As soon as the transfer is completed an interrupt is generated and in the DMA channel interrupt routine the transfer complete interrupt pending bit is cleared. The data counter is stored before and after the transfer to show that all data has been transfered. TransferStatus gives the data transfer status where it is PASSED if transmitted and received data are the same otherwise it is FAILED

Yes, it is possible to transfer data from a device configured with IP 10.1.1.1/16 to a device configured with IP 10.1.2.1/16 as long as both devices are connected to the same network and have the appropriate routing configured. The devices must also be able to communicate with each other via the network layer protocol, such as TCP/IP, and have the necessary ports open to allow for data transfer.

阅读全文