RFID天线使用时的程序代码
时间: 2023-07-11 18:11:41 浏览: 52
RFID 天线的程序代码会因不同的硬件设备和开发环境而有所不同。以下是一个简单的示例代码,演示如何使用 Arduino 控制 RFID 天线:
```c
#include <SPI.h>
#include <MFRC522.h>
#define RST_PIN 9 // Reset Pin
#define SS_PIN 10 // Slave Select Pin
MFRC522 mfrc522(SS_PIN, RST_PIN); // Create MFRC522 instance
void setup() {
Serial.begin(9600); // Initiate a serial communication
SPI.begin(); // Initiate SPI bus
mfrc522.PCD_Init(); // Initiate MFRC522
}
void loop() {
// Look for new cards
if ( ! mfrc522.PICC_IsNewCardPresent()) {
return;
}
// Select one of the cards
if ( ! mfrc522.PICC_ReadCardSerial()) {
return;
}
// Show UID on serial monitor
Serial.print("UID tag :");
String content= "";
byte letter;
for (byte i = 0; i < mfrc522.uid.size; i++) {
Serial.print(mfrc522.uid.uidByte[i] < 0x10 ? " 0" : " ");
Serial.print(mfrc522.uid.uidByte[i], HEX);
content.concat(String(mfrc522.uid.uidByte[i] < 0x10 ? " 0" : " "));
content.concat(String(mfrc522.uid.uidByte[i], HEX));
}
Serial.println();
Serial.print("Message : ");
content.toUpperCase();
// Halt PICC
mfrc522.PICC_HaltA();
// Stop encryption on PCD
mfrc522.PCD_StopCrypto1();
}
```
这个程序使用了 `MFRC522` 库来控制 RFID 天线。 `setup()` 函数初始化了串口、SPI 总线和 MFRC522。 `loop()` 函数在循环中查找新卡片,如果找到了则选择其中一个卡片并显示其 UID。最后,程序会停止加密并关闭天线。
请注意,这只是一个简单的示例代码,您需要根据您使用的硬件设备和开发环境进行适当的修改。