基于stm32中ccd的开源代码
时间: 2024-03-16 16:47:17 浏览: 221
基于STM32F405的四轴开源飞控代码
5星 · 资源好评率100%
以下是一个基于STM32的CCD开源代码,供您参考:
```
/* Includes ------------------------------------------------------------------*/
#include "stm32f10x.h"
#include "stm32f10x_gpio.h"
#include "stm32f10x_rcc.h"
#include "misc.h"
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/**
* @brief Main program.
* @param None
* @retval None
*/
int main(void)
{
/* GPIO Init Structure declaration */
GPIO_InitTypeDef GPIO_InitStructure;
/* RCC_APB2PeriphClockCmd Init Structure declaration */
RCC_APB2PeriphClockCmdTypeDef RCC_APB2PeriphClockCmd_InitStructure;
/* RCC_APB2PeriphClockCmd Init Structure declaration */
NVIC_InitTypeDef NVIC_InitStructure;
/* Enable GPIOA clock */
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA, ENABLE);
/* Configure PA0 pin as input floating */
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
GPIO_Init(GPIOA, &GPIO_InitStructure);
/* Enable AFIO clock */
RCC_APB2PeriphClockCmd(RCC_APB2Periph_AFIO, ENABLE);
/* Connect EXTI0 Line to PA0 pin */
GPIO_EXTILineConfig(GPIO_PortSourceGPIOA, GPIO_PinSource0);
/* Configure EXTI0 line */
EXTI_InitTypeDef EXTI_InitStructure;
EXTI_InitStructure.EXTI_Line = EXTI_Line0;
EXTI_InitStructure.EXTI_Mode = EXTI_Mode_Interrupt;
EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Rising_Falling;
EXTI_InitStructure.EXTI_LineCmd = ENABLE;
EXTI_Init(&EXTI_InitStructure);
/* Enable and set EXTI0 Interrupt to the lowest priority */
NVIC_InitStructure.NVIC_IRQChannel = EXTI0_IRQn;
NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0x0F;
NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0x0F;
NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
NVIC_Init(&NVIC_InitStructure);
while (1)
{
/* Do nothing */
}
}
/**
* @brief EXTI0 interrupt handler.
* @param None
* @retval None
*/
void EXTI0_IRQHandler(void)
{
/* Check if EXTI_Line0 is asserted */
if (EXTI_GetITStatus(EXTI_Line0) != RESET)
{
/* Do something */
/* Clear the EXTI line 0 pending bit */
EXTI_ClearITPendingBit(EXTI_Line0);
}
}
```
这是一个简单的示例代码,用于初始化并配置一个基于STM32的CCD传感器。注意,这只是一个示例代码,您需要根据具体的CCD传感器型号和硬件配置进行适当的修改。
阅读全文