华为交换机怎么配置镜像端口
时间: 2023-11-29 20:03:56 浏览: 33
可以通过以下步骤配置华为交换机的镜像端口:
1. 进入交换机的系统视图模式。
2. 创建一个监控交换机端口的镜像端口。可以使用命令 port-mirroring <monitor-port> <source-port> <direction>,其中<monitor-port>是镜像端口,<source-port>是被监控端口,<direction>是流量方向。
3. 指定镜像端口的输出方向。可以使用命令 port-mirroring observe-port <monitor-port> <direction>,其中<monitor-port>是镜像端口,<direction>是流量方向。
4. 启用镜像端口。可以使用命令 port-mirroring enable <monitor-port>,其中<monitor-port>是镜像端口。
希望以上信息能够帮助您成功配置华为交换机的镜像端口。
相关问题
华为交换机镜像端口配置
要在华为交换机上配置镜像端口,可以按照以下步骤进行操作:
1. 进入交换机的系统视图:system-view
2. 创建一个用于镜像的对象组,包含需要被镜像的端口:interface-group name group1
interface GigabitEthernet 0/0/1
interface GigabitEthernet 0/0/2
...
3. 创建一个用于镜像的监控口,将镜像流量输出到该口:interface GigabitEthernet 0/0/3
4. 配置镜像端口:port-mirroring to interface GigabitEthernet 0/0/3 from interface-group group1
以上配置将会把 group1 中的所有端口的流量镜像到 GigabitEthernet 0/0/3 上进行监控。
华为交换机如何配置镜像口
华为交换机配置镜像口可以参考以下步骤:
1. 配置被监控端口。
```
interface GigabitEthernet 0/0/1
port link-type access
port default vlan 10
```
2. 配置镜像口。
```
interface GigabitEthernet 0/0/2
port link-type access
port default vlan 10
```
3. 配置监控端口镜像。
```
observe-port GigabitEthernet 0/0/1
```
4. 将镜像口与监控端口绑定。
```
monitor-session 1 destination interface GigabitEthernet 0/0/2
monitor-session 1 source interface GigabitEthernet 0/0/1
```
以上步骤中,GigabitEthernet 0/0/1 是被监控端口,GigabitEthernet 0/0/2 是镜像口。通过 observe-port 命令将被监控端口设置为被监控对象,然后通过 monitor-session 命令将被监控端口和镜像口进行绑定。