写出使用stm32f730r8使用type-c协议的pd协议协商出10V的电压的代码
时间: 2024-05-24 19:11:48 浏览: 23
由于使用Type-C协议需要涉及到很多底层的通信协议,因此这里只给出一个简单的示例代码,仅供参考:
#include "stm32f7xx.h"
#include "stm32f730xx.h"
#include "stm32f7xx_hal.h"
#define PD_ADDRESS 0x12
void PD_Transmit(uint8_t *data, uint8_t len);
void PD_Receive(uint8_t *data, uint8_t len);
int main(void)
{
HAL_Init();
// 初始化Type-C接口
// ...
// 向PD设备发送初始化命令
uint8_t init_cmd[] = {0x05, 0x00, PD_ADDRESS};
PD_Transmit(init_cmd, sizeof(init_cmd));
// 等待PD设备回应
uint8_t response[8];
PD_Receive(response, sizeof(response));
// 发送协商请求
uint8_t request[] = {0x18, 0x10, PD_ADDRESS, 0x00, 0x00, 0x00, 0x00, 0x00};
PD_Transmit(request, sizeof(request));
// 等待PD设备回应
PD_Receive(response, sizeof(response));
// 解析回应数据
uint16_t voltage = (response[3] << 8) | response[2]; // 获取电压值,单位为0.02V
uint16_t current = (response[5] << 8) | response[4]; // 获取电流值,单位为0.01A
// 计算电压和电流的实际值
float v = voltage * 0.02f;
float i = current * 0.01f;
// 如果PD设备支持10V电压,则发送确认命令
if (v >= 10.0f)
{
uint8_t accept[] = {0x1A, 0x10, PD_ADDRESS, 0x00, 0x00, 0x00, 0x00, 0x00};
PD_Transmit(accept, sizeof(accept));
}
while (1)
{
// 等待PD设备发送新的协商请求或其他命令
PD_Receive(response, sizeof(response));
// 处理命令
// ...
}
}
void PD_Transmit(uint8_t *data, uint8_t len)
{
// 使用STM32F730R8的USB PD功能向PD设备发送数据
// ...
}
void PD_Receive(uint8_t *data, uint8_t len)
{
// 使用STM32F730R8的USB PD功能接收PD设备发送的数据
// ...
}
相关推荐
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![docx](https://img-home.csdnimg.cn/images/20210720083331.png)
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)