function BUPT_writeimagePGM(image, filename, format) fid = fopen(filename, 'w'); if strcmp(format, 'P2') % ASCII format (P2) fprintf(fid, 'P2\n'); fprintf(fid, '# image created by Baojie Chen\n'); fprintf(fid, '%d %d\n', size(image, 2), size(image, 1)); fprintf(fid, '255\n'); for i = 1:size(image, 1) fprintf(fid, '%d ', image(i, :)); fprintf(fid, '\n'); end elseif strcmp(format, 'P5') % Binary format (P5) fprintf(fid, 'P5\n'); fprintf(fid, '# image created by Zhuocheng Hu\n'); fprintf(fid, '%d %d\n', size(image, 2), size(image, 1)); fprintf(fid, '255\n'); % Conversion of image data to binary format binary_data = uint8(reshape(image', [], 1)); fwrite(fid, binary_data, 'uint8'); else fclose(fid); error('Unsupported file format'); end fclose(fid); end
时间: 2024-03-03 22:52:24 浏览: 20
这段代码是用于将一个灰度图像保存为 PGM 格式的文件。P2 和 P5 分别代表 ASCII 和二进制格式。函数的输入参数 image 是需要保存的灰度图像,filename 是保存的文件名,format 是保存的文件格式。函数首先打开文件,然后根据文件格式开始写入文件头和图像数据。如果文件格式不是 P2 或 P5,函数会关闭文件并抛出一个错误。
相关问题
如何调用下面这个函数function image=BUPT_readPGM(filename, format) fid = fopen(filename, 'r'); file_format = fgetl(fid); % Check the file format if ~strcmp(file_format, format) error('Invalid file format'); end % Skip the comments line = fgetl(fid); while line(1) == '#' line = fgetl(fid); end % Read image dimensions dimensions = sscanf(line, '%d'); width = dimensions(1); height = dimensions(2); % Skip the maximum gray value line fgetl(fid); % Read the image data if strcmp(format, 'P2') % ASCII format (P2) image = fscanf(fid, '%d', [width, height])'; elseif strcmp(format, 'P5') % Binary format (P5) image = fread(fid, [width, height], 'uint8')'; else error('Unsupported file format'); egnd fclose(fid); image = uint8(image); % Convert imae to uint8 data type end
要调用这个函数,需要按照以下步骤进行:
1. 将函数保存在一个单独的文件中,例如 BUPT_readPGM.m。
2. 准备需要读取的 PGM 文件,例如 test.pgm。
3. 在 MATLAB 中调用函数,例如:
```
filename = 'test.pgm';
format = 'P5';
image = BUPT_readPGM(filename, format);
```
其中,filename 是需要读取的 PGM 文件名,format 是图像格式('P2' 或 'P5'),image 是读取到的图像数据。
需要注意的是,BUPT_readPGM 函数中的代码只能处理 PGM 格式的图像文件,如果需要读取其他格式的图像文件,需要修改代码中的一些细节。同时,函数的输入参数需要根据实际情况进行修改。
以下面代码为参考,写一个将灰度图像保存为PPM格式的文件格式改为P3和P6 function BUPT_writeimagePGM(image, filename, format) fid = fopen(filename, 'w'); if strcmp(format, 'P2') % ASCII format (P2) fprintf(fid, 'P2\n'); fprintf(fid, '# image created by Baojie Chen\n'); fprintf(fid, '%d %d\n', size(image, 2), size(image, 1)); fprintf(fid, '255\n'); for i = 1:size(image, 1) fprintf(fid, '%d ', image(i, :)); fprintf(fid, '\n'); end elseif strcmp(format, 'P5') % Binary format (P5) fprintf(fid, 'P5\n'); fprintf(fid, '# image created by Zhuocheng Hu\n'); fprintf(fid, '%d %d\n', size(image, 2), size(image, 1)); fprintf(fid, '255\n'); % Conversion of image data to binary format binary_data = uint8(reshape(image', [], 1)); fwrite(fid, binary_data, 'uint8'); else fclose(fid); error('Unsupported file format'); end fclose(fid); end
下面是修改后的代码,可以将灰度图像保存为 PPM 格式的文件,其中 P3 和 P6 分别代表 ASCII 和二进制格式:
```
function BUPT_writeimagePPM(image, filename, format)
fid = fopen(filename, 'w');
if strcmp(format, 'P3')
% ASCII format (P3)
fprintf(fid, 'P3\n');
fprintf(fid, '# image created by Baojie Chen\n');
fprintf(fid, '%d %d\n', size(image, 2), size(image, 1));
fprintf(fid, '255\n');
for i = 1:size(image, 1)
fprintf(fid, '%d %d %d ', [image(i, :), image(i, :), image(i, :)]);
fprintf(fid, '\n');
end
elseif strcmp(format, 'P6')
% Binary format (P6)
fprintf(fid, 'P6\n');
fprintf(fid, '# image created by Zhuocheng Hu\n');
fprintf(fid, '%d %d\n', size(image, 2), size(image, 1));
fprintf(fid, '255\n');
% Conversion of image data to binary format
binary_data = uint8(reshape(repmat(image, [1 1 3])', [], 1));
fwrite(fid, binary_data, 'uint8');
else
fclose(fid);
error('Unsupported file format');
end
fclose(fid);
end
```
与之前的代码相比,修改后的代码主要是修改了文件格式的头部信息,以及将灰度图像转换为彩色图像。在 ASCII 格式下,每个像素需要用三个数值表示 R、G、B 三个通道的亮度。在二进制格式下,需要将灰度图像转换为彩色图像,并将每个像素的值写入文件。