DS18B20驱动代码
时间: 2023-12-26 17:47:03 浏览: 38
以下是DS18B20驱动代码的示例:
```c
#include <OneWire.h>
// 定义引脚
#define ONE_WIRE_BUS 2
// 初始化 OneWire 对象
OneWire oneWire(ONE_WIRE_BUS);
// DS18B20 的地址
byte addr[8];
void setup() {
Serial.begin(9600);
// 搜索 DS18B20 的地址
if (!oneWire.search(addr)) {
Serial.println("No DS18B20 detected.");
while (1);
}
// 判断 DS18B20 的地址是否正确
if (OneWire::crc8(addr, 7) != addr[7]) {
Serial.println("Invalid DS18B20 address.");
while (1);
}
// 输出 DS18B20 的地址
Serial.print("Found DS18B20 with address: ");
for (byte i = 0; i < 8; i++) {
Serial.print(addr[i], HEX);
Serial.print(" ");
}
Serial.println();
// 启动温度转换
oneWire.reset();
oneWire.select(addr);
oneWire.write(0x44); // 发送启动转换命令
}
void loop() {
// 等待温度转换完成
delay(1000);
// 读取温度值
oneWire.reset();
oneWire.select(addr);
oneWire.write(0xBE); // 发送读取温度命令
// 读取温度数据
byte data[9];
for (byte i = 0; i < 9; i++) {
data[i] = oneWire.read();
}
// 判断温度数据是否正确
if (OneWire::crc8(data, 8) != data[8]) {
Serial.println("Invalid temperature data.");
return;
}
// 计算温度值
int16_t raw = (data[1] << 8) | data[0];
float temp = (float)raw / 16.0;
// 输出温度值
Serial.print("Temperature: ");
Serial.print(temp);
Serial.println(" C");
}
```
以上代码使用了 `OneWire` 库来控制 DS18B20 温度传感器。首先,代码搜索 DS18B20 的地址,然后发送启动转换命令,等待温度转换完成,发送读取温度命令,读取温度数据,并计算出温度值。最后,代码输出温度值到串口。
相关推荐
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)