与单片机相关Column Address Set 什么意思,有什么用
时间: 2023-06-15 16:07:57 浏览: 208
Column Address Set (CAS) 是与动态随机存储器 (DRAM) 相关的术语,用于指定 DRAM 芯片中的列地址。在 DRAM 芯片中,内存被组织成一个个的存储单元,每个存储单元都有一个唯一的行和列地址。CAS 操作用于指定要访问的数据所在的列地址。在单片机中,CAS 操作通常由内存控制器或存储器接口电路执行。
CAS 操作在单片机系统中非常重要,因为它允许 CPU 访问内存中特定的数据。通过指定正确的列地址,CPU 可以读取或写入内存中的数据。在实时控制和嵌入式系统中,快速访问内存是非常关键的,因此了解 CAS 操作是非常重要的。
相关问题
生成一个用C52单片机,超声波测距,要求:oled屏幕
显示距离值的程序
以下是使用C语言编写的超声波测距程序,使用C52单片机和OLED屏幕显示距离值:
```c
#include <reg52.h>
#include <intrins.h>
#define FREQ 11059200UL
sbit TRIG = P1^0;
sbit ECHO = P1^1;
unsigned char code font_6x8[95][6];
unsigned int distance = 0;
void delay_us(unsigned int us)
{
while(us--)
{
_nop_();
_nop_();
_nop_();
_nop_();
}
}
void delay_ms(unsigned int ms)
{
while(ms--)
{
delay_us(1000);
}
}
void init()
{
TMOD = 0x01;
TH0 = 0;
TL0 = 0;
EA = 1;
ET0 = 1;
TRIG = 0;
}
void display(unsigned char x, unsigned char y, unsigned char ch)
{
unsigned char i, j;
ch -= 32;
for(i = 0; i < 6; i++)
{
j = font_6x8[ch][i];
OLED_SetPos(x, y + i);
OLED_WrDat(j);
}
}
void OLED_Init()
{
OLED_WR_Byte(0xAE,OLED_CMD);//--display off
OLED_WR_Byte(0x00,OLED_CMD);//---set low column address
OLED_WR_Byte(0x10,OLED_CMD);//---set high column address
OLED_WR_Byte(0x40,OLED_CMD);//--set start line address
OLED_WR_Byte(0xB0,OLED_CMD);//--set page address
OLED_WR_Byte(0x81,OLED_CMD); // contract control
OLED_WR_Byte(0xFF,OLED_CMD);//--128
OLED_WR_Byte(0xA1,OLED_CMD);//set segment remap
OLED_WR_Byte(0xA6,OLED_CMD);//--normal / reverse
OLED_WR_Byte(0xA8,OLED_CMD);//--set multiplex ratio(1 to 64)
OLED_WR_Byte(0x3F,OLED_CMD);//--1/64 duty
OLED_WR_Byte(0xC8,OLED_CMD);//Com scan direction
OLED_WR_Byte(0xD3,OLED_CMD);//set display offset
OLED_WR_Byte(0x00,OLED_CMD);//
OLED_WR_Byte(0xD5,OLED_CMD);//set osc division
OLED_WR_Byte(0x80,OLED_CMD);//
OLED_WR_Byte(0xD8,OLED_CMD);//set area color mode off
OLED_WR_Byte(0x05,OLED_CMD);//
OLED_WR_Byte(0xD9,OLED_CMD);//Set Pre-Charge Period
OLED_WR_Byte(0xF1,OLED_CMD);//
OLED_WR_Byte(0xDA,OLED_CMD);//set com pin configuartion
OLED_WR_Byte(0x12,OLED_CMD);//
OLED_WR_Byte(0xDB,OLED_CMD);//set Vcomh
OLED_WR_Byte(0x30,OLED_CMD);//
OLED_WR_Byte(0x8D,OLED_CMD);//set charge pump enable
OLED_WR_Byte(0x14,OLED_CMD);//
OLED_WR_Byte(0xAF,OLED_CMD);//--turn on oled panel
}
void OLED_SetPos(unsigned char x, unsigned char y)
{
OLED_WR_Byte(0xb0 + y, OLED_CMD);
OLED_WR_Byte(((x & 0xf0) >> 4) | 0x10, OLED_CMD);
OLED_WR_Byte((x & 0x0f), OLED_CMD);
}
void OLED_WR_Byte(unsigned dat,unsigned cmd)
{
unsigned char i;
if(cmd)
{
OLED_DC = 1;
}
else
{
OLED_DC = 0;
}
OLED_CS = 0;
for(i = 0; i < 8; i++)
{
OLED_SCLK = 0;
if(dat & 0x80)
{
OLED_SDIN = 1;
}
else
{
OLED_SDIN = 0;
}
OLED_SCLK = 1;
dat <<= 1;
}
OLED_CS = 1;
}
void OLED_Clear()
{
unsigned char i, j;
for(i = 0; i < 8; i++)
{
OLED_SetPos(0,i);
for(j = 0; j < 128; j++)
{
OLED_WrDat(0);
}
}
}
void OLED_WrDat(unsigned char dat)
{
OLED_WR_Byte(dat, OLED_DATA);
}
void Timer0_ISR() interrupt 1
{
static unsigned int counter = 0;
if(counter > 50)
{
TRIG = 1;
delay_us(10);
TRIG = 0;
while(ECHO == 0);
TH0 = 0;
TL0 = 0;
while(ECHO == 1);
distance = (unsigned int)(TH0 << 8 | TL0) / 58;
counter = 0;
}
counter++;
}
void main()
{
init();
OLED_Init();
OLED_Clear();
while(1)
{
display(0, 0, 'D');
display(6, 0, 'i');
display(12, 0, 's');
display(18, 0, 't');
display(24, 0, 'a');
display(30, 0, 'n');
display(36, 0, 'c');
display(42, 0, 'e');
display(48, 0, ':');
display(54, 0, ' ');
display(72, 0, distance / 100 + '0');
display(78, 0, distance % 100 / 10 + '0');
display(84, 0, distance % 10 + '0');
delay_ms(100);
OLED_Clear();
}
}
```
该程序通过超声波测距模块测量距离,并在OLED屏幕上显示距离值。程序中使用了定时器0来计数,每50个计数就触发一次超声波测距,并计算距离值。距离值通过数字的方式在OLED屏幕上显示。
51单片机lcd编程万年历和闹钟
A:编写51单片机LCD编程万年历和闹钟需要以下步骤:
1. 定义需要使用的头文件。
2. 初始化LCD屏幕并设置光标位置。
3. 编写万年历部分的代码,包括获取当前年月日和计算每个月份的天数。
4. 编写闹钟部分的代码,包括获取当前时间和设置闹钟。
5. 将计算出来的时间和日期显示在LCD屏幕上。
以下是示例代码:
#include <reg51.h>
#include <stdlib.h>
#include <stdio.h>
#define LCD_CMD_SELECT 0 // LCD指令
#define LCD_DATA_SELECT 1 // LCD数据
sbit RS = P2^0; // LCD命令/数据选择引脚
sbit RW = P2^1; // LCD读/写选择引脚
sbit EN = P2^2; // LCD使能引脚
void delay_ms(unsigned int count)
{
unsigned int i,j;
for(i=0;i<count;i++)
{
for(j=0;j<114;j++);
}
}
void lcd_write_cmd(unsigned char cmd)
{
RS = LCD_CMD_SELECT; // 告诉LCD这是指令
RW = 0; // 写操作
P0 = cmd; // 数据总线传递指令
EN = 1; // 使能LCD
delay_ms(5); // 稍等一下
EN = 0; // 关闭使能
delay_ms(5); // 稍等一下
}
void lcd_write_data(unsigned char dat)
{
RS = LCD_DATA_SELECT; // 告诉LCD这是数据
RW = 0; // 写操作
P0 = dat; // 数据总线传递数据
EN = 1; // 使能LCD
delay_ms(5); // 稍等一下
EN = 0; // 关闭使能
delay_ms(5); // 稍等一下
}
void lcd_init()
{
lcd_write_cmd(0x38); // 设置LCD显示格式
lcd_write_cmd(0x0c); // 关闭光标显示
lcd_write_cmd(0x06); // 允许自动右移
lcd_write_cmd(0x01); // 清除LCD显示
}
void lcd_set_cursor(unsigned char row,unsigned char column)
{
unsigned char address;
if(row == 0)
{
address = 0x80 + column; // 第一行从0x80开始
}
else
{
address = 0xc0 + column; // 第二行从0xc0开始
}
lcd_write_cmd(address); // 设置光标位置
}
void calendar()
{
unsigned int year,month,day;
// 获取年份
lcd_set_cursor(0,0);
lcd_write_data("Year:");
year = get_key();
// 获取月份
lcd_set_cursor(0,0);
lcd_write_data("Month:");
month = get_key();
// 获取日期
lcd_set_cursor(0,0);
lcd_write_data("Day:");
day = get_key();
// 计算日期
// 年月日的参数伪代码:year, month, day
int day_per_month[] = {0,31,59,90,120,151,181,212,243,273,304,334};
int days_since_1900 = day + day_per_month[month - 1];
if((month > 2) && (year % 4 == 0))
{
days_since_1900 += 1;
}
year -= 1900;
int leap_years = (year - 1) / 4;
int days_since_1970 = (year - 70) * 365 + leap_years + days_since_1900;
int days_since_unix_epoch = days_since_1970 * 86400;
lcd_set_cursor(1,0);
lcd_write_data(itoa(days_since_unix_epoch));
}
void alarm()
{
unsigned int hour,min;
lcd_set_cursor(0,0);
lcd_write_data("Hour:");
hour = get_key();
lcd_set_cursor(0,0);
lcd_write_data("Min:");
min = get_key();
while(1)
{
unsigned int current_hour,current_min;
// 获取当前时间
// 获取当前小时
// 获取当前分钟
if((hour == current_hour) && (min == current_min))
{
// 触发闹钟
// ...
break;
}
}
}
void main()
{
lcd_init();
calendar();
alarm();
while(1);
}