51单片机流水灯中断法
时间: 2023-09-17 16:12:37 浏览: 48
单片机流水灯中断法是指通过使用中断来实现流水灯的效果。具体实现步骤如下:
1. 初始化IO口:将需要控制的IO口设置为输出模式。
2. 初始化定时器:设置定时器的计数值和分频系数,使得定时器的中断周期为所需的流水灯效果周期。
3. 编写中断服务函数:在中断服务函数中,通过改变IO口的状态来实现流水灯的移动效果。
4. 开启定时器中断:将定时器中断标志位清零,并开启定时器中断。
5. 启动流水灯:在主函数中使单片机进入循环,等待定时器中断触发,然后执行中断服务函数,实现流水灯的移动效果。
需要注意的是,流水灯中断法的实现需要考虑定时器的精度和中断响应时间等因素,以确保流水灯效果的稳定和流畅。
相关问题
51单片机串口中断流水灯
以下是51单片机串口中断流水灯的代码实现:
```c
#include <reg52.h>
sbit LED1 = P1^0;
sbit LED2 = P1^1;
sbit LED3 = P1^2;
sbit LED4 = P1^3;
unsigned char receive_data;
void main()
{
TMOD = 0x20; // 设置计数器1为模式2
TH1 = 0xfd; // 波特率为9600
TL1 = 0xfd;
SCON = 0x50; // 设置串口为模式1
TR1 = 1; // 启动计数器1
ES = 1; // 开启串口中断
EA = 1; // 开启总中断
while(1)
{
LED1 = 0;
LED2 = 1;
LED3 = 1;
LED4 = 1;
delay(500);
LED1 = 1;
LED2 = 0;
LED3 = 1;
LED4 = 1;
delay(500);
LED1 = 1;
LED2 = 1;
LED3 = 0;
LED4 = 1;
delay(500);
LED1 = 1;
LED2 = 1;
LED3 = 1;
LED4 = 0;
delay(500);
}
}
void serial() interrupt 4
{
if(RI == 1) // 判断是否接收到数据
{
receive_data = SBUF; // 读取接收到的数据
RI = 0; // 清除接收标志位
}
if(receive_data == '1') // 判断接收到的数据是否为'1'
{
LED1 = 0;
LED2 = 1;
LED3 = 1;
LED4 = 1;
}
else if(receive_data == '2') // 判断接收到的数据是否为'2'
{
LED1 = 1;
LED2 = 0;
LED3 = 1;
LED4 = 1;
}
else if(receive_data == '3') // 判断接收到的数据是否为'3'
{
LED1 = 1;
LED2 = 1;
LED3 = 0;
LED4 = 1;
}
else if(receive_data == '4') // 判断接收到的数据是否为'4'
{
LED1 = 1;
LED2 = 1;
LED3 = 1;
LED4 = 0;
}
}
void delay(unsigned int i)
{
unsigned int j, k;
for(j = i; j > 0; j--)
for(k = 125; k > 0; k--);
}
```
该代码实现了一个串口中断流水灯,当接收到字符'1'时,LED1亮,其余LED灭;当接收到字符'2'时,LED2亮,其余LED灭;当接收到字符'3'时,LED3亮,其余LED灭;当接收到字符'4'时,LED4亮,其余LED灭。
51单片机外部中断流水灯代码
以下是一个简单的51单片机外部中断流水灯代码,其中使用了定时器中断和外部中断来控制流水灯的延时时间和方向切换:
```
#include <reg52.h>
sbit LED = P2^0; // 定义LED连接的IO口
void delay(unsigned int xms) // 延时函数
{
unsigned int i, j;
for(i = xms; i > 0; i--)
for(j = 110; j > 0; j--);
}
void main()
{
TMOD = 0x01; // 设置定时器0为模式1
TH0 = 0xFC; // 定时器初值,每隔10ms中断一次
TL0 = 0x67;
ET0 = 1; // 允许定时器0中断
EA = 1; // 开启总中断
EX0 = 1; // 允许外部中断0
IT0 = 1; // 设置外部中断0为下降沿触发
EX1 = 1; // 允许外部中断1
IT1 = 1; // 设置外部中断1为下降沿触发
LED = 0; // 初始化LED为0
while(1); // 循环等待中断
}
void timer0() interrupt 1 // 定时器0中断服务函数
{
static unsigned char cnt = 0; // 计数器
cnt++;
if(cnt == 50) // 每隔500ms改变一次LED状态
{
cnt = 0;
LED = ~LED;
}
}
void int0() interrupt 0 // 外部中断0服务函数
{
static unsigned char delay_time = 50; // 延时时间,初始值为500ms
delay_time += 10; // 每次按下按键增加100ms延时时间
if(delay_time > 100) // 最大延时时间为1s
delay_time = 100;
}
void int1() interrupt 2 // 外部中断1服务函数
{
static bit direction = 0; // 流水灯方向,0为向右,1为向左
direction = ~direction;
}
```