STM32F407利用串口驱动ds18b20
时间: 2023-10-01 14:03:39 浏览: 41
好的,您想了解如何利用STM32F407通过串口驱动ds18b20,是吗?
首先,您需要将ds18b20连接到STM32F407的USART串口引脚。然后,您需要编写程序使用串口通信协议与ds18b20进行通信。
其中,您需要使用STM32的USART模块来发送和接收数据。为了与ds18b20通信,您需要使用单总线协议。您可以编写程序使用该协议从ds18b20读取温度数据。
代码示例:
```
#include "stm32f4xx.h"
#define DS18B20_PIN GPIO_Pin_0
#define DS18B20_PORT GPIOA
void ds18b20_init(void)
{
RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOA, ENABLE);
GPIO_InitTypeDef GPIO_InitStructure;
GPIO_InitStructure.GPIO_Pin = DS18B20_PIN;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_OUT;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_InitStructure.GPIO_OType = GPIO_OType_OD;
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
GPIO_Init(DS18B20_PORT, &GPIO_InitStructure);
}
void ds18b20_write_bit(uint8_t bit)
{
GPIO_ResetBits(DS18B20_PORT, DS18B20_PIN);
if (bit)
{
delay_us(5);
GPIO_SetBits(DS18B20_PORT, DS18B20_PIN);
delay_us(60);
}
else
{
delay_us(60);
GPIO_SetBits(DS18B20_PORT, DS18B20_PIN);
delay_us(5);
}
}
uint8_t ds18b20_read_bit(void)
{
GPIO_ResetBits(DS18B20_PORT, DS18B20_PIN);
delay_us(5);
GPIO_SetBits(DS18B20_PORT, DS18B20_PIN);
delay_us(10);
uint8_t bit = GPIO_ReadInputDataBit(DS18B20_PORT, DS18B20_PIN);
delay_us(55);
return bit;
}
void ds18b20_write_byte(uint8_t byte)
{
for (uint8_t i = 0; i < 8; i++)
{
ds18b20_write_bit(byte & (1 << i));
}
}
uint8_t ds18b20_read_byte(void)
{
uint8_t byte = 0;
for (uint8_t i = 0; i < 8; i++)
{
byte |= ds18b20_read_bit() << i;
}
return byte;
}
float ds18b20_read_temperature()
{
ds18b20_init();
ds18b20_write_byte(0xcc);
ds18b20_write_byte(0x44);
delay_us(750000);
ds18b20_init();
ds18b20_write_byte(0xcc);
ds18b20_write_byte(0xbe);
uint16_t temperature = ds18b20_read_byte();
temperature |= ds18b20_read_byte() << 8;
uint8_t digit = temperature >> 4;
uint8_t decimal = (temperature & 0x0f) * 625 / 100;
return digit + decimal / 100.0;
}
```
这段代码中包括了ds18b20初始化、单总线协议的编写、读取温度值的代码。您可以根据实际需要进行修改和使用。
希望可以帮到您。