TM1650读取按键和数码管显示程序
时间: 2024-05-10 15:18:34 浏览: 9
以下是一个基于STM32的TM1650读取按键和数码管显示的程序,你可以参考一下:
```c
#include "stm32f10x.h"
#include "tm1650.h"
#define KEY1_GPIO_PORT GPIOB
#define KEY1_GPIO_PIN GPIO_Pin_12
#define KEY2_GPIO_PORT GPIOB
#define KEY2_GPIO_PIN GPIO_Pin_13
void init_key(void)
{
GPIO_InitTypeDef GPIO_InitStructure;
/* Enable GPIOB clock */
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB, ENABLE);
/* Configure Key1 pin as input floating */
GPIO_InitStructure.GPIO_Pin = KEY1_GPIO_PIN;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
GPIO_Init(KEY1_GPIO_PORT, &GPIO_InitStructure);
/* Configure Key2 pin as input floating */
GPIO_InitStructure.GPIO_Pin = KEY2_GPIO_PIN;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
GPIO_Init(KEY2_GPIO_PORT, &GPIO_InitStructure);
}
int main(void)
{
TM1650_Init();
init_key();
uint8_t buf[4] = {0};
uint8_t key_state = 0;
while(1)
{
/* 读取TM1650的数据 */
TM1650_ReadKeyAndDisplay(buf);
/* 检测按键状态 */
if(GPIO_ReadInputDataBit(KEY1_GPIO_PORT, KEY1_GPIO_PIN) == 0)
key_state |= 0x01;
else
key_state &= ~0x01;
if(GPIO_ReadInputDataBit(KEY2_GPIO_PORT, KEY2_GPIO_PIN) == 0)
key_state |= 0x02;
else
key_state &= ~0x02;
/* 根据按键状态更新TM1650的数据 */
if(key_state & 0x01)
buf[0] = (buf[0] < 9) ? (buf[0] + 1) : 0;
if(key_state & 0x02)
buf[1] = (buf[1] < 9) ? (buf[1] + 1) : 0;
/* 更新TM1650的显示 */
TM1650_WriteData(buf);
}
}
```
在这个程序中,我们首先初始化了TM1650和按键的GPIO口,并且定义了一个长度为4的数组`buf`,用来存储TM1650的数据。然后我们进入了一个无限循环中,在每次循环中,我们首先读取TM1650的数据和按键状态,然后根据按键状态来更新TM1650的数据,最后再将更新后的数据写入TM1650中。