可以写一个开关控制灯灯程序吗
时间: 2024-01-23 21:02:30 浏览: 29
当然可以,以下是一个简单的开关控制灯灯程序:
```python
import RPi.GPIO as GPIO
import time
# 设置GPIO模式
GPIO.setmode(GPIO.BOARD)
# 设置GPIO引脚
led_pin = 11
switch_pin = 13
# 设置GPIO状态
GPIO.setup(led_pin, GPIO.OUT)
GPIO.setup(switch_pin, GPIO.IN, pull_up_down=GPIO.PUD_UP)
# 灯灯初始状态为关闭
led_status = False
try:
while True:
# 监听开关状态
switch_status = GPIO.input(switch_pin)
# 如果开关状态为高电平,表示关闭灯灯
if switch_status == GPIO.HIGH:
if led_status:
GPIO.output(led_pin, GPIO.LOW)
led_status = False
print('灯灯已关闭')
time.sleep(0.1)
# 如果开关状态为低电平,表示打开灯灯
else:
if not led_status:
GPIO.output(led_pin, GPIO.HIGH)
led_status = True
print('灯灯已打开')
time.sleep(0.1)
except KeyboardInterrupt:
# 清理GPIO资源
GPIO.cleanup()
```
在程序中,我们使用了GPIO库来控制GPIO引脚的状态。在程序运行时,我们通过监听GPIO13引脚的状态来控制GPIO11引脚的状态,从而控制灯灯的开关状态。当GPIO13引脚为高电平时,GPIO11引脚的状态为低电平,表示关闭灯灯;当GPIO13引脚为低电平时,GPIO11引脚的状态为高电平,表示打开灯灯。
相关推荐
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)