thinkpad启动时出现 to interrupt normal

这个问题可能是由于电脑硬件或软件故障引起的。建议您尝试以下步骤来解决问题：

1. 重启电脑并按F8键进入安全模式，看看是否还会出现这个问题。

2. 检查电脑内存条是否松动或损坏，如果有问题，可以尝试更换。

3. 更新或重新安装操作系统或驱动程序，可能会修复软件相关的问题。

4. 到 BIOS 设置中检查是否有任何错误或警告信息，并进行必要的修复。

如果以上步骤不起作用，建议您联系技术支持或将电脑送到专业维修中心进行检查和修理。

相关问题

Assign the interrupt service routines to ePWM interrupts

As an AI language model, I do not have access to the specific hardware architecture you are working with. However, in general, the steps to assign interrupt service routines to ePWM interrupts are as follows:

1. Identify the ePWM interrupts that you want to assign a service routine to.

2. Write the service routine in C or Assembly language. The service routine should include the necessary code to handle the interrupt, such as clearing the interrupt flag or performing any required computations.

3. Map the service routine to the appropriate interrupt vector. This typically involves modifying a table or register that associates interrupt vectors with their corresponding service routines.

4. Enable the ePWM interrupts that you want to use. This typically involves setting a bit in a register that controls the interrupt enable/disable state.

5. Test the interrupt service routines to ensure that they are functioning correctly.

Note that the specific steps and registers used to perform these tasks may vary depending on the specific hardware platform you are working with. Consult the documentation for your hardware platform for more detailed instructions.

Failed to obtain JDBC Connection; SQLException: interrupt

当出现"Failed to obtain JDBC Connection; SQLException: interrupt"错误时，这通常意味着应用程序无法从数据库连接池中获取连接。这可能是由于以下原因之一导致的：

1. 数据库连接池已满，没有可用的连接。
2. 数据库连接池配置不正确。
3. 数据库服务器宕机或无法响应请求。

为了解决这个问题，可以尝试以下步骤：

1. 检查数据库连接池的配置是否正确，并确保连接池中有足够的连接可用。
2. 检查数据库服务器是否正在运行，并且可以响应请求。
3. 如果问题仍然存在，请尝试重新启动应用程序和数据库服务器。

另外，可以查看应用程序的日志文件以获取更多详细信息，以确定问题的根本原因。