采用“Bit banding”方式配置LED对应引脚为输出状态的代码是
时间: 2024-05-08 15:15:17 浏览: 22
以下是采用“Bit banding”方式配置LED对应引脚为输出状态的代码:
```c
#define RCC_AHBPeriph_GPIOA ((uint32_t)0x00000001)
#define GPIO_Pin_5 ((uint16_t)0x0020)
// Bit banding address for PA5
#define PA5_BB ((uint32_t)(PERIPH_BB_BASE + (GPIOA_BASE - PERIPH_BASE) * 32 + (5 * 4)))
// Enable GPIOA clock
RCC_AHBPeriphClockCmd(RCC_AHBPeriph_GPIOA, ENABLE);
// Configure PA5 as output
*(volatile uint32_t *)PA5_BB = 1;
GPIO_InitTypeDef GPIO_InitStructure;
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_5;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_OUT;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
GPIO_Init(GPIOA, &GPIO_InitStructure);
```
在上面的代码中,我们首先定义了RCC_AHBPeriph_GPIOA和GPIO_Pin_5常量,然后定义了PA5_BB常量,用于访问PA5引脚的Bit banding地址。
接着,我们启用了GPIOA的时钟,并将PA5引脚的Bit banding地址设置为1,以配置引脚为输出状态。
最后,我们使用GPIO_Init函数初始化GPIOA的PA5引脚,设置它的输出模式、速度、输出类型和上拉/下拉电阻。
相关推荐
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)