wireshark configuration Nak
时间: 2023-09-30 21:08:22 浏览: 52
To configure Wireshark to send a Nak message, you need to follow these steps:
1. Open Wireshark and start capturing network traffic.
2. Locate the packet that contains the message you want to send a Nak response to.
3. Right-click on the packet and select "Follow TCP Stream."
4. In the new window that opens, locate the message you want to send a Nak response to.
5. Right-click on the message and select "Copy -> Bytes -> Hex Stream."
6. Close the TCP stream window and go back to the main Wireshark window.
7. Select "Edit -> Preferences" from the menu.
8. In the preferences window, select "Protocols" from the list on the left.
9. Locate the protocol you are using and click on it.
10. Under the protocol settings, locate the "Nak" or "Negative Acknowledgement" option and enable it.
11. Paste the hex stream you copied earlier into the "Nak message" field.
12. Click "OK" to save your changes.
Now, when Wireshark detects a message that matches the one you configured, it will automatically send a Nak response.
相关推荐
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)