ALTER PROCEDURE [dbo].[浸润线插入] AS BEGIN INSERT INTO [tewp].[dbo].[ReportData] ( SensorID, X, Y, Z, dX, dY, dZ, ToHoleTop, ToHoleBottom, LimitDamDepth, LimitSafeHeight, wTime, ReportKey, LimitBeachLength ) SELECT CAST (62 AS NUMERIC)AS SensorID, CAST ( X AS NUMERIC )AS X, CAST ( X AS NUMERIC )AS Y, CAST ( X AS NUMERIC )AS Z, CAST ( X AS NUMERIC )AS dX, CAST ( X AS NUMERIC ) AS dY, CAST ( X AS NUMERIC ) AS dZ, CAST ( X AS NUMERIC ) AS ToHoleTop, CAST ( X AS NUMERIC )AS ToHoleBottom, CAST ( X AS NUMERIC )AS LimitDamDepth, CAST ( X AS NUMERIC )AS LimitSafeHeight, CAST ( X AS NUMERIC )AS LimitBeachLength, CONVERT ( CHAR ( 19 ), aDatetime, 120 ) AS wTime, CONVERT ( CHAR ( 10 ), aDatetime, 120 ) AS ReportKey FROM [Proj].[dbo].[雨量计] END 消息 8114，级别 16，状态 5，过程 dbo.浸润线插入，行 5 [批起始行 2] 从数据类型 varchar 转换为 numeric 时出错。

这段代码中存在一个转换错误。错误信息提示从 varchar 转换为 numeric 时出错。具体来说，以下几行代码中的 X 应该被替换为具体的数值或变量：

CAST ( X AS  NUMERIC )AS  X
CAST ( X AS  NUMERIC )AS Y
CAST ( X AS  NUMERIC )AS Z
CAST ( X AS  NUMERIC )AS dX
CAST ( X AS  NUMERIC ) AS dY
CAST ( X AS  NUMERIC ) AS dZ
CAST ( X AS  NUMERIC ) AS ToHoleTop
CAST ( X AS  NUMERIC )AS ToHoleBottom
CAST ( X AS  NUMERIC )AS LimitDamDepth
CAST ( X AS  NUMERIC )AS LimitSafeHeight
CAST ( X AS  NUMERIC )AS LimitBeachLength

这些行中的 X 应该被替换为数值或变量，例如：

CAST ( 1.23 AS  NUMERIC )AS  X
CAST ( @Y AS  NUMERIC )AS Y
CAST ( 4.56 AS  NUMERIC )AS Z
-- ...

请检查代码中的变量或数值是否正确，并进行相应的修正。

相关问题

ALTER PROCEDURE [dbo].[浸润线插入] AS BEGIN INSERT INTO [tewp].[dbo].[ReportData] ( SensorID, X, Y, Z, dX, dY, dZ, ToHoleTop, ToHoleBottom, LimitDamDepth, LimitSafeHeight, wTime, ReportKey, LimitBeachLength ) SELECT CAST (62 AS NUMERIC)AS SensorID, CAST ( X AS NUMERIC )AS X, CAST ( X AS NUMERIC )AS Y, CAST ( X AS NUMERIC )AS Z, CAST ( X AS NUMERIC )AS dX, CAST ( X AS NUMERIC ) AS dY, CAST ( X AS NUMERIC ) AS dZ, CAST ( X AS NUMERIC ) AS ToHoleTop, CAST ( X AS NUMERIC )AS ToHoleBottom, CAST ( X AS NUMERIC )AS LimitDamDepth, CAST ( X AS NUMERIC )AS LimitSafeHeight, CAST ( X AS NUMERIC )AS LimitBeachLength, CONVERT ( CHAR ( 19 ), aDatetime, 120 ) AS wTime, CONVERT ( CHAR ( 10 ), aDatetime, 120 ) AS ReportKey FROM [Proj].[dbo].[雨量计] END 消息 8114，级别 16，状态 5，过程 dbo.浸润线插入，行 5 [批起始行 2] 从数据类型 varchar 转换为 numeric 时出错。 你帮我改一下

根据错误信息，应该将代码中的 X 替换为实际的数值或变量。以下是修改后的代码：

ALTER PROCEDURE [dbo].[浸润线插入]
AS
BEGIN
    INSERT INTO [tewp].[dbo].[ReportData] (
        SensorID, X, Y, Z, dX, dY, dZ, ToHoleTop, ToHoleBottom, LimitDamDepth, LimitSafeHeight, wTime, ReportKey, LimitBeachLength
    )
    SELECT
        CAST (62 AS NUMERIC) AS SensorID,
        CAST (X AS NUMERIC) AS X,
        CAST (Y AS NUMERIC) AS Y,
        CAST (Z AS NUMERIC) AS Z,
        CAST (dX AS NUMERIC) AS dX,
        CAST (dY AS NUMERIC) AS dY,
        CAST (dZ AS NUMERIC) AS dZ,
        CAST (ToHoleTop AS NUMERIC) AS ToHoleTop,
        CAST (ToHoleBottom AS NUMERIC) AS ToHoleBottom,
        CAST (LimitDamDepth AS NUMERIC) AS LimitDamDepth,
        CAST (LimitSafeHeight AS NUMERIC) AS LimitSafeHeight,
        CAST (LimitBeachLength AS NUMERIC) AS LimitBeachLength,
        CONVERT(CHAR(19), aDatetime, 120) AS wTime,
        CONVERT(CHAR(10), aDatetime, 120) AS ReportKey
    FROM [Proj].[dbo].[雨量计]
END

请注意，我假设 X, Y, Z, dX, dY, dZ, ToHoleTop, ToHoleBottom, LimitDamDepth, LimitSafeHeight 和 LimitBeachLength 这些列都应该被转换为 NUMERIC 类型，如果不是 NUMERIC，请将 CAST 的目标数据类型替换为实际的数据类型。

ALTER PROCEDURE [dbo].[库水位] AS BEGIN INSERT INTO [tewp].[dbo].[B_DAM_WATER_LEVEL](DAM_ID,SENSOR_ID,WATER_LEVEL,UPLOAD_TIME) SELECT 27 as DAM_ID, 65 AS SENSOR_ID, X as WATER_LEVEL, aDatetime as UPLOAD_TIME from [Proj].[dbo].[库水位] END 把aDatetime 转为char类型

好的，您想把存储过程中的`aDatetime`字段转换为`char`类型，是这样的吗？如果是的话，可以使用`CONVERT`函数将`aDatetime`转换为`char`类型，并将其存储到`UPLOAD_TIME`字段中。修改后的存储过程如下所示：

ALTER PROCEDURE [dbo].[库水位] 
AS 
BEGIN 
    INSERT INTO [tewp].[dbo].[B_DAM_WATER_LEVEL](DAM_ID,SENSOR_ID,WATER_LEVEL,UPLOAD_TIME) 
    SELECT 27 as DAM_ID, 65 AS SENSOR_ID, X as WATER_LEVEL, CONVERT(char(10), aDatetime, 120) as UPLOAD_TIME  
    from [Proj].[dbo].[库水位]    
END 

上述存储过程使用了`CONVERT(char(10), aDatetime, 120)`函数将`aDatetime`字段转换为`char`类型，并使用了`120`作为转换格式，表示`yyyy-mm-dd`格式的日期字符串。您可以根据需要修改转换格式。