arduino代码设置没有操作后2分钟进入睡眠状态
时间: 2023-11-18 17:04:20 浏览: 36
可以使用Arduino的Sleep库来实现这个功能。以下是示例代码:
```
#include <avr/sleep.h>
void setup() {
// 设置引脚状态
}
void loop() {
delay(1000); // 延迟1秒钟
if (millis() > 120000) { // 如果运行时间超过2分钟
set_sleep_mode(SLEEP_MODE_PWR_DOWN); // 设置睡眠模式为电源关闭模式
sleep_enable(); // 启用睡眠模式
sleep_mode(); // 进入睡眠模式
// 程序会在这里暂停,直到外部中断唤醒它
sleep_disable(); // 禁用睡眠模式
millis() = 0; // 重置计时器
}
// 其他的代码
}
```
在上面的代码中,我们使用了`millis()`函数来计算程序运行的时间。如果运行时间超过2分钟,我们就设置睡眠模式为电源关闭模式,启用睡眠模式并进入睡眠状态。程序会一直停在`sleep_mode()`函数那里,直到外部中断唤醒它。唤醒后,我们禁用睡眠模式并重置计时器。
相关问题
arduino进入休眠状态后如何接收串口消息
在Arduino进入睡眠状态后,串口通信通常会被中断,因此无法接收新消息。如果您需要在睡眠状态下接收串口消息,则需要使用Arduino的另一个功能:引脚变化中断(pin change interrupt)。
引脚变化中断可以在某些引脚的状态发生变化时触发中断。您可以使用它来检测特定引脚上的电平变化,并在中断服务函数中读取串口数据。以下是一个示例代码,演示如何使用引脚变化中断来接收串口消息:
```
#include <avr/sleep.h>
#include <avr/interrupt.h>
const int interruptPin = 2;
volatile bool interruptFlag = false;
void setup() {
pinMode(interruptPin, INPUT_PULLUP);
attachInterrupt(digitalPinToInterrupt(interruptPin), ISR, FALLING);
PCMSK2 |= _BV(PCINT18); // 使能引脚变化中断
PCICR |= _BV(PCIE2); // 使能引脚变化中断
Serial.begin(9600);
}
void loop() {
if (interruptFlag) {
Serial.println("Interrupt occurred, going to sleep...");
interruptFlag = false;
delay(100); // 确保串口数据发送完毕
set_sleep_mode(SLEEP_MODE_PWR_DOWN); // 设置睡眠模式
sleep_enable(); // 允许睡眠模式
sleep_cpu(); // 进入睡眠模式
// 中断唤醒后会从这里继续执行
Serial.println("Woke up from sleep.");
}
}
ISR(PCINT2_vect) {
if(digitalRead(interruptPin) == LOW) {
while (Serial.available()) {
char c = Serial.read();
// 在这里处理接收到的串口数据
}
}
}
void ISR() {
interruptFlag = true;
}
```
在上面的代码中,我们使用attachInterrupt()函数将中断服务函数与引脚2的下降沿触发条件连接起来。然后,我们使用引脚变化中断来检测引脚状态的变化。在setup()函数中,我们使用`PCMSK2 |= _BV(PCINT18)`和`PCICR |= _BV(PCIE2)`使能引脚变化中断。
在ISR()函数中,我们将中断标志变量设置为真。在PCINT2_vect中断服务函数中,我们检测引脚的状态,如果它变成LOW,我们就读取所有可用的串口数据,并在其中处理它们。
请注意,在引脚变化中断中,您需要使用digitalRead()函数来读取引脚的状态,而不是使用digitalPinToInterrupt()函数来转换引脚数字为中断编号。
arduino睡眠模式
Arduino睡眠模式是一种可以降低功耗的模式,允许用户停止或关闭未使用的模块。Arduino UNO、Arduino Nano和Pro-mini等型号的Arduino板配备了ATmega328P微控制器,它具有欠压检测器,用于监测睡眠模式下的电源电压。ATmega328P有六种睡眠模式,包括Idle、ADC noise reduction、Power-Down、Power-Save、Standby和External Standby。在实际应用中,最常用的是掉电模式(SLEEP_MODE_PWR_DOWN)。在睡眠模式下,Arduino可以通过内部或外部中断或复位来唤醒。通过使用睡眠模式,Arduino可以在不需要运行时降低功耗,从而延长电池寿命或减少能源消耗。\[1\]
在Arduino中,可以使用avr/sleep.h库来设置和进入睡眠模式。例如,可以使用set_sleep_mode函数设置所需的睡眠模式,然后使用sleep_mode函数进入睡眠状态。具体的代码示例可以参考引用\[2\]和引用\[3\]中的代码。根据具体情况,可以选择适合自己需求的睡眠模式。\[2\]\[3\]
#### 引用[.reference_title]
- *1* *2* [Arduino休眠模式和看门狗以及中断详解](https://blog.csdn.net/qq_39400113/article/details/107536805)[target="_blank" data-report-click={"spm":"1018.2226.3001.9630","extra":{"utm_source":"vip_chatgpt_common_search_pc_result","utm_medium":"distribute.pc_search_result.none-task-cask-2~all~insert_cask~default-1-null.142^v91^insertT0,239^v3^insert_chatgpt"}} ] [.reference_item]
- *3* [Arduino - 休眠模式](https://blog.csdn.net/sdlgq/article/details/50497610)[target="_blank" data-report-click={"spm":"1018.2226.3001.9630","extra":{"utm_source":"vip_chatgpt_common_search_pc_result","utm_medium":"distribute.pc_search_result.none-task-cask-2~all~insert_cask~default-1-null.142^v91^insertT0,239^v3^insert_chatgpt"}} ] [.reference_item]
[ .reference_list ]