stm32温度控制系统降温代码
时间: 2023-07-09 10:55:11 浏览: 136
以下是一个简单的stm32温度控制系统降温的示例代码,你可以根据自己的需求进行修改和优化:
```c
#include "stm32f10x.h"
#define TARGET_TEMP 30 // 目标温度
#define PWM_FREQ 100 // PWM输出频率
#define PWM_MAX_DUTY 1000 // PWM输出最大占空比
void ADC_Configuration(void);
void TIM_Configuration(void);
void PWM_Configuration(void);
int main(void)
{
int current_temp = 0; // 当前温度
int pwm_duty = 0; // 当前PWM输出占空比
ADC_Configuration(); // 配置ADC模块
TIM_Configuration(); // 配置定时器
PWM_Configuration(); // 配置PWM输出
while (1)
{
// 读取温度值
ADC_SoftwareStartConvCmd(ADC1, ENABLE);
while (!ADC_GetFlagStatus(ADC1, ADC_FLAG_EOC));
current_temp = ADC_GetConversionValue(ADC1);
// 比较温度值
if (current_temp > TARGET_TEMP)
{
// 控制降温
pwm_duty = (current_temp - TARGET_TEMP) * PWM_MAX_DUTY / 100;
TIM_SetCompare1(TIM2, pwm_duty);
}
else
{
// 停止PWM输出
TIM_SetCompare1(TIM2, 0);
}
}
}
// 配置ADC模块
void ADC_Configuration(void)
{
ADC_InitTypeDef ADC_InitStructure;
GPIO_InitTypeDef GPIO_InitStructure;
RCC_APB2PeriphClockCmd(RCC_APB2Periph_ADC1 | RCC_APB2Periph_GPIOA, ENABLE);
// 配置ADC通道
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AIN;
GPIO_Init(GPIOA, &GPIO_InitStructure);
// 配置ADC模块
ADC_InitStructure.ADC_Mode = ADC_Mode_Independent;
ADC_InitStructure.ADC_ScanConvMode = DISABLE;
ADC_InitStructure.ADC_ContinuousConvMode = DISABLE;
ADC_InitStructure.ADC_ExternalTrigConv = ADC_ExternalTrigConv_None;
ADC_InitStructure.ADC_DataAlign = ADC_DataAlign_Right;
ADC_InitStructure.ADC_NbrOfChannel = 1;
ADC_Init(ADC1, &ADC_InitStructure);
// 配置ADC通道采样时间
ADC_RegularChannelConfig(ADC1, ADC_Channel_0, 1, ADC_SampleTime_28Cycles5);
ADC_Cmd(ADC1, ENABLE);
}
// 配置定时器
void TIM_Configuration(void)
{
TIM_TimeBaseInitTypeDef TIM_TimeBaseStructure;
RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM2, ENABLE);
// 配置定时器
TIM_TimeBaseStructure.TIM_Period = 1000 / PWM_FREQ - 1;
TIM_TimeBaseStructure.TIM_Prescaler = 7200 - 1;
TIM_TimeBaseStructure.TIM_ClockDivision = 0;
TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up;
TIM_TimeBaseInit(TIM2, &TIM_TimeBaseStructure);
TIM_Cmd(TIM2, ENABLE);
}
// 配置PWM输出
void PWM_Configuration(void)
{
GPIO_InitTypeDef GPIO_InitStructure;
TIM_OCInitTypeDef TIM_OCInitStructure;
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA | RCC_APB2Periph_AFIO, ENABLE);
// 配置PWM输出引脚
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_1;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_Init(GPIOA, &GPIO_InitStructure);
// 配置PWM输出
TIM_OCInitStructure.TIM_OCMode = TIM_OCMode_PWM1;
TIM_OCInitStructure.TIM_OutputState = TIM_OutputState_Enable;
TIM_OCInitStructure.TIM_Pulse = 0;
TIM_OCInitStructure.TIM_OCPolarity = TIM_OCPolarity_High;
TIM_OC1Init(TIM2, &TIM_OCInitStructure);
TIM_OC1PreloadConfig(TIM2, TIM_OCPreload_Enable);
}
```
在该示例代码中,使用ADC模块读取温度传感器的值,并通过PWM控制PA1引脚输出降温信号,其中PWM输出频率为100Hz,PWM输出占空比由当前温度与目标温度的差值决定。
相关推荐
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![-](https://csdnimg.cn/download_wenku/file_type_column_c1.png)
![-](https://csdnimg.cn/download_wenku/file_type_column_c1.png)
![-](https://csdnimg.cn/download_wenku/file_type_column_c1.png)
![-](https://csdnimg.cn/download_wenku/file_type_column_c1.png)
![-](https://csdnimg.cn/download_wenku/file_type_column_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)